Author	[Modern View]
DrLarryE 09-30-2012 10:13:41 68.60.77.15 Report to Moderator	I need to replace the plunger. In the shop manual the plunger guide is made up of what looks like 4 pieces, the draft control spring plate and the hydraulic spring seat, which I have. I need to get a "seat, hydraulic lift draft control spring" (this is how it is listed with discount tractor parts) which was missing, and what look in the picture like a washer. Is this the "felt, spring seat" listed with the parts company? I want to make sure I get everything I need at once. Also, I imagine it would be very difficult to reattach the control fork to the pump control valve if the sump is not emptied, correct? Thanks [Reply]   [No Email]
Royse 09-30-2012 18:01:37 69.36.49.151 Report to Moderator	Re: Replacing Broken Main Control Spring Plunger in reply to Mad Farmer, 09-30-2012 10:13:41   You might check with Jim.UT or John Smith for the seat you're missing. There is a felt washer in there, I think they're about $5 new. You can get them from this site or others. Used felt would most likely be worn out.   [Reply]  [No Email]
DrLarryE 10-01-2012 03:58:50 68.60.77.15 Report to Moderator	Re: Replacing Broken Main Control Spring Plunger in reply to Royse, 09-30-2012 18:01:37   YT has the parts and I ordered them this AM...Just wanted to make sure I was ordering the right parts.   [Reply]  [No Email]
HCooke 09-30-2012 17:06:30 70.195.65.28 Report to Moderator	Re: Replacing Broken Main Control Spring Plunger in reply to DrLarryE, 09-30-2012 10:13:41   Probably possible. Noty easy in any case. I stradle the tractor and put one arm in each inspection port to do it. Hobo made a special tool to do it.   [Reply]  [No Email]