Author	[Modern View]
Darius Kleine 09-27-2012 00:47:57 69.161.29.18 Report to Moderator	Hello all. I have had my 1948 8n for several years and today acquired a basket case ford brand front end loading bucket setup that I believe is made for a N series ford, but.. I am not seeing any of the mounting needed on my tractor. Also to complicate things I have a half track setup that I quite like and hope to modify things so they will work with the loader, anyhow, the first thing I need to do is verify that this is the right loader for a 8n before I start overhauling it. Can anyone help me with this? [Reply]   [No Email]
IDkleine 09-29-2012 21:51:04 69.161.29.18 Report to Moderator	Re: 8n loading bucket in reply to Bob Harvey, 09-27-2012 00:47:57   You would think it would work for me too right, but instead it just says "returning to upload another photo.." and never finishes after I hit continue. [Reply]  [No Email]
TheOldHokie 09-27-2012 16:26:34 108.8.6.218 Report to Moderator	Re: 8n loading bucket in reply to soundguy, 09-27-2012 00:47:57   Works for me. TOH [Reply]  [No Email]
Royse 09-27-2012 16:24:26 69.36.49.151 Report to Moderator	Re: 8n loading bucket in reply to old, 09-27-2012 00:47:57   After you click upload and see the preview in the little box, click the Continue button and it should insert in the main box below where you typed. You'll be able to see the tags/code it inserts. This post was edited by Royse at 16:25:31 09/27/12. [Reply]  [No Email]
IDkleine 09-27-2012 15:50:29 69.161.29.18 Report to Moderator	Re: 8n loading bucket in reply to howdy1960, 09-27-2012 00:47:57   Quoting Removed, click Modern View to see Just trying to upload pics from my hard drive using the advanced posting tools. [Reply]  [No Email]
TheOldHokie 09-27-2012 10:52:54 108.8.6.218 Report to Moderator	Re: 8n loading bucket in reply to Mr. T. Minnesota, 09-27-2012 00:47:57   Quoting Removed, click Modern View to see What site are using for uploading your pictures? TOH [Reply]  [No Email]
IDkleine 09-27-2012 10:06:17 69.161.29.18 Report to Moderator	Re: 8n loading bucket in reply to Darius Kleine, 09-27-2012 00:47:57   Ok maybe not. The photos seem to be uploading but not going showing up on my post. Will work on this. [Reply]  [No Email]
IDkleine 09-27-2012 09:58:23 69.161.29.18 Report to Moderator	Re: 8n loading bucket in reply to Darius Kleine, 09-27-2012 00:47:57   Here are some pics [Reply]  [No Email]
howdy1960 09-27-2012 06:58:44 173.191.206.106 Report to Moderator	Re: 8n loading bucket in reply to Darius Kleine, 09-27-2012 00:47:57   I have a Dearborn 19-61 Loader on my 2N. While I dont have the complete half track set up I do have the rear mounting brackets attached to tractor. Dont know if they were on at same time for alinement purposes. [Reply]  [No Email]
TheOldHokie 09-27-2012 06:31:03 108.8.6.218 Report to Moderator	Re: 8n loading bucket in reply to Pooh Bear, 09-27-2012 00:47:57   Quoting Removed, click Modern View to see Go to: Follow the Manuals->Loaders link in the red navigation bar at the top of the page. You will find user and parts manuals for most of the older Ford loaders there and you should be able to ID what you have from them. If you need the loader or pump mounting brackets I make them. TOH [Reply]  [No Email]
soundguy 09-27-2012 05:00:04 184.245.186.197 Report to Moderator	Re: 8n loading bucket in reply to Darius Kleine, 09-27-2012 00:47:57   1, congrats on the N with tracks. I love them arrps and bombardier setups 2, we will need the model id of the laoder.. or at least pics. go ahead and give us both if you hav ethe id #.. plus pics of the N showing us the clearance you have at the back axle and the bogey or dead wheel. 3, *most* N loaders have 3 attach points. 2 at the rear axles where the fender bolts go, and 1 at the front king pin where there is a hanger plate installed for the kingpin and the front of the loader swings from there and lets the bolster support the axle independently of the loader. thus the loader swings fromt he front and then has beams tot he back axles *USUALLY*. lets see what you go. [Reply]  [No Email]