|
| |
Topic: Resistor part no napa ohm requirement
[Return to Forum]
| Author |
[Modern View]
|
| Britcheflee
08-19-2012 10:11:53
67.187.170.181
|
I think I may need to replace resistor on tractor 8N 6 volt - there are a couple of parts showing on the napa web site two show 1.35 ohm resistance and one 0.35 ohm (part No Ech 1cr11 and ech 1cr40)
Which if any of the two resistance do I need for my system.
Thank you
Lee
|
|
|
| JMOR
08-19-2012 11:10:31
72.181.173.171
|
|
Re: Resistor part no napa ohm requirement in reply to Jock(OR), 08-19-2012 10:11:53
|
|
| Quoting Removed, click Modern View to see6v front & this resistor is his situation. GOOD LUCK! :)
|
|
|
| Britcheflee
08-19-2012 15:06:50
67.187.170.181
|
|
Re: Resistor part no napa ohm requirement in reply to JMOR, 08-19-2012 11:10:31
|
|
| Well, I bought that resistor from this site and it is wired up as per the wiring diagram I have - might not look pretty but think it is correctly wired up - please let me know if it is wrong resistor or incorrectly wired.
Thanks,
lee
|
|
|
| Dell (WA)
08-19-2012 10:26:58
71.217.16.29
|
|
Re: Resistor part no napa ohm requirement in reply to Britcheflee, 08-19-2012 10:11:53
|
|
| | Lee.........what makes you think you need to change yer weird 4-nipple dizzy's "infamous ballast resistor"??? Resistor is like a light bulb, it either works or it don't (burned out!!) Iff'n you gottza sparkies, guess what??? Yer resistor is working. The specs fer the "infamous ballast resistor" is 0.7-ohms COLD. It is impossible to measure when hot, but FYI it is about 2.5-ohms. As to yer NAPA resistor, 0.35-ohm is in the ballpark. Why don't you buy the real ballast resistor from this site??? ........Dell, retired electronics engine and self-appointed sparkie-meister
|
|
|
| Bruce (VA)
08-19-2012 10:19:52
24.125.80.178
|
|
Re: Resistor part no napa ohm requirement in reply to Britcheflee, 08-19-2012 10:11:53
|
|
| | We're going to need a bit more info. Front or side distributor? Are you asking about the OEM ballast resistor on a front distributor, or adding an additional resistor to allow you to use a 6v coil on a 12v conversion?
|
|
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
