Author [expand]	[Modern View]
badger bob 11-12-2009 13:53:46 74.33.155.218 740871 Report to Moderator	well i put a orc on my 2n and the thing is fiting sloppy. i think that the splinds are worren on the shaft. is there a fix? or do i just bite the bullit and by a new one? or take a chance and try ebay? thanks Bob [Reply]   [No Email]
Badger Bob 11-12-2009 15:51:46 74.33.155.218 740891 Report to Moderator	Re: loose pto splinds in reply to badger bob, 11-12-2009 13:53:46   1-1/8 pto shaft and 1-1/8 female to 1-3/8 male orc. i have it on my new (to me ) erskine snow blower and it wobbles a bit more then i like. do you think that it can be shimed up? thanks Bob   [Reply]   [No Email]
Danny in CO 11-12-2009 18:54:02 67.142.130.25 740927 Report to Moderator	Re: loose pto splinds in reply to Badger Bob, 11-12-2009 15:51:46   I don't see a problem with shimming it. Aluminum pop can should work great. Danny   [Reply]   [No Email]
Danny in CO 11-12-2009 14:20:34 12.109.151.104 740875 Report to Moderator	Re: loose pto splinds in reply to badger bob, 11-12-2009 13:53:46   Bob, There are 2 different sizes of PTO shafts. The original was an 1 1/8". Replacements are larger, 1 3/8" (I think). Did you happen to measure your PTO before buying the ORC? Just a thought, Danny   [Reply]   [No Email]
Grand Valley Tractor 11-12-2009 14:08:08 12.168.206.38 740873 Report to Moderator	Re: loose pto splinds in reply to badger bob, 11-12-2009 13:53:46   Ummmm...that is the measurement at the end of my ORC spline. Tim   [Reply]   [No Email]
Grand Valley Tractor 11-12-2009 14:02:08 12.168.206.38 740872 Report to Moderator	Re: loose pto splinds in reply to badger bob, 11-12-2009 13:53:46   Bob, That spline has a fair amount of slop even when new. My Jubilee is in pretty "average wear condition", and I just measured the "total excursion" to be about 1/4". Tim '42 Ford 2N, #9N103775 '49 Farmall Cub, #98040 '53 Ford NAA Jubilee, #NAA-56293 '64 Minneapolis Moline Jetstar 3, #28301626   [Reply]   [No Email]