Author [expand]	[Modern View]
GB in MT. 11-02-2009 07:37:41 216.47.49.207 739466 Report to Moderator	Before and after pix, mainly for the owner of the carb., but also to show what an original TSX33 carb. looks like when it leaves my carb. shack. Will be testing this, on Hermie the 2N today, and shipping it back to the owner, tomorrow. (If all goes as planned on the testing) :lol: Before overhaul: After overhaul: Have an "N" day!!! Gary :) [Reply]   [No Email]
GB in MT. 11-03-2009 07:25:21 216.47.49.207 739625 Report to Moderator	Re: M/S TSX33 carb....testing today...gone to IL. Tomorrow in reply to Mikey's 8n, 11-02-2009 07:37:41   Dan; If/when I find out....I'll post it. Weird acting, runs good, Idles good.....Only will go so far with the top end of the throttle. I've got to have missed somthing in one or more of the passages.!!!??? Funny thing is: I had good air flow with the air gun through all of them...soooooo, As soon as I get some other stuff done around here....it is back into a dismantle mode!!!!!!!!!!! :shock: Did I tell ya .......I have tunes in the shack...maybe thats where I went wrong. Not paying attention to buisness!!!!!!!!!! :lol: Not my gov.,.....checked that out already....gotta be the carb. :? Gary :roll:   [Reply]   [No Email]
Dan in CO 11-03-2009 07:09:57 72.19.169.14 739622 Report to Moderator	Re: M/S TSX33 carb....testing today...gone to IL. Tomorrow in reply to GB in MT., 11-02-2009 07:37:41   Gary: When you go back into that carb and find out what was causing the problem, please post the results so we can learn what you found out. This is something like reading a mystery and I for one would like to hear the outcome.   [Reply]   [No Email]
GB in MT. 11-03-2009 06:55:25 216.47.49.207 739620 Report to Moderator	Re: M/S TSX33 carb....testing today...gone to IL. Tomorrow in reply to Crazyfeathers, 11-02-2009 07:37:41   pikewi said: (quoted from post at 09:36:22 11/03/09) Was lookin' at yer tool assortment there. Where do you get the dental pick? Mine are all broke. (I got a roachclip like yers too) Pike; The dental picks, I get from my dentist, after they are no longer of any use to him, he just chucks them in the can. I just call him, for more, and he saves them for me. As for the "ROACH clips".......those are surgical clamps used by doc's, to clamp off bleeders in surguries. Same deal there, just hunt around for a doctor that will give ya the worn ones!!!!! :wink: My wife got those for me a long time ago, from the hospital where she use to work as a respitory theropist. Gary 8)   [Reply]   [No Email]
pikewi 11-03-2009 06:36:22 64.33.132.122 739618 Report to Moderator	Re: M/S TSX33 carb....testing today...gone to IL. Tomorrow in reply to GB in MT., 11-02-2009 07:37:41   Was lookin' at yer tool assortment there. Where do you get the dental pick? Mine are all broke. (I got a roachclip like yers too)   [Reply]   [No Email]
GB in MT. 11-02-2009 16:25:33 216.47.49.207 739556 Report to Moderator	Re: M/S TSX33 carb....testing today...gone to IL. Tomorrow in reply to Dunk, 11-02-2009 07:37:41   rmlarsen said: (quoted from post at 17:17:29 11/02/09) I'm curious as to what that brass piece is adjacent to the Main jet adjuster? I've seen TSX 33's but they did not have that piece rml; As r geiger, told ya....that peice is to insure that the adj. power screw does not move from the intended setting. The later M/S TSX carbs did not use this. This carb, came from IL., off a 1941 9N. First one that I have ever worked on in this good a condition, that had all the orig. peices still on it!!! :shock: Now all I have to do .....is get it RUNNING good!!! My testing did not go well today....sooooo, I must have missed something the first time around. There is always a first, in everything ya do!!! :lol: Back on the work bench for this one. Top end power is not what I liked. Must still have a restriction in it somewhere. :x Gary :roll:   [Reply]   [No Email]
rmlarsen 11-02-2009 14:17:29 24.22.165.181 739536 Report to Moderator	Re: M/S TSX33 carb....testing today...gone to IL. Tomorrow in reply to GB in MT., 11-02-2009 07:37:41   I'm curious as to what that brass piece is adjacent to the Main jet adjuster? I've seen TSX 33's but they did not have that piece   [Reply]   [Send Email]
r geiger(oR) 11-02-2009 15:20:45 71.111.118.23 739543 Report to Moderator	Re: M/S TSX33 carb....testing today...gone to IL. Tomorrow in reply to rmlarsen, 11-02-2009 14:17:29   Keeps the jet from moving. click lock.   [Reply]   [No Email]
lha 11-02-2009 11:49:54 24.176.97.9 739520 Report to Moderator	Re: M/S TSX33 carb....testing today...gone to IL. Tomorrow in reply to GB in MT., 11-02-2009 07:37:41   great looking work.Really enjoyed seeing pics of carb shack good luck,keep the pics coming!!!!!===lha   [Reply]   [Send Email]
GB in MT. 11-02-2009 11:46:36 216.47.49.207 739519 Report to Moderator	Re: M/S TSX33 carb....testing today...gone to IL. Tomorrow in reply to old, 11-02-2009 07:37:41   Thanks Dan; Yep, that radiator heater is a good one. Havn't been cold in there yet. It's filled with oil, and once it gets up to temp, I have to keep an eye on it, or it will cook me right out of the shack!!! :lol: I was out there until 7:20 last night finishing up this carb. 33* outside and 69* in the shack. Works great!!! 8) Gary :)   [Reply]   [No Email]
Dan in CO 11-02-2009 10:31:04 72.19.169.14 739498 Report to Moderator	Re: M/S TSX33 carb....testing today...gone to IL. Tomorrow in reply to GB in MT., 11-02-2009 07:37:41   Gary: So now that it is colder there, how is the shop working out? Are you able to keep it cozy enough with the electric heat? As always, that carb looks new and I bet it works like new too.   [Reply]   [No Email]
GB in MT. 11-02-2009 08:02:09 216.47.49.207 739477 Report to Moderator	Re: M/S TSX33 carb....testing today...gone to IL. Tomorrow in reply to Sean (TX), 11-02-2009 07:37:41   ED; The reason being, that you already know what has to be done to the carbs!!!!!!!!!! :lol: 8) Gary :)   [Reply]   [No Email]
Ed S. (IL) 11-02-2009 07:52:37 12.2.142.12 739473 Report to Moderator	Re: M/S TSX33 carb....testing today...gone to IL. Tomorrow in reply to GB in MT., 11-02-2009 07:37:41   GB, You said it's going to Illinois, but you never called to get my address??? :P :lol: e (looks great!) s   [Reply]   [No Email]