Author [expand]	[Modern View]
Grand Valley Tractor 10-28-2009 05:33:47 12.168.206.38 738729 Report to Moderator	IMHO, $1800 is a good price for the tractor...but I'd tweak him at a few hundred less. But, even at $1800, I wouldn't care what the situation was with the hydraulics....they can be fixed. And what do you end up with?...A nice tractor that, within a couple years, will be worth significantly more than you have in it! All this, of course, assumes that it's a CONFIRMED Jubilee...We've all seen MANY models referred to as "Jubilees". Grand Valley Tractor [Reply]   [No Email]
Britcheflee 10-28-2009 07:38:12 67.187.164.184 738757 Report to Moderator	Re: Jubilee...nice price...what about hydraulics in reply to Grand Valley Tractor, 10-28-2009 05:33:47   Well, I did e mail but no response so maybe its gone - however, can you give me more information about what a 'Confirmed' Jubilee is? Not sure what that means. Many thanks, Lee   [Reply]   [No Email]
Dell (WA) 10-28-2009 09:20:46 172.191.224.18 738771 Report to Moderator	Re: Jubilee...nice price...what about hydraulics in reply to Britcheflee, 10-28-2009 07:38:12   Lee.......what do you think "confirmed" means??? ONLY the 1953 NAA is the Jubilee. It is confirmed by looking at the cyclops hood medallion which specifically sez "Golden Jubilee". (unless its fallen off or been replaced) Then yer "stuck" with confirmation via engine block serial number above the starter tranny bump. (and engines have been known to be replaced, so notta sure thing) Don't gitt hung-up on finding a Jubilee unless yer a sphincterly challenged tractor inspector ......Dell   [Reply]   [Send Email]
Britcheflee 10-28-2009 12:14:59 67.187.164.184 738795 Report to Moderator	Re: Jubilee...nice price...what about hydraulics in reply to Dell (WA), 10-28-2009 09:20:46   By the way...have not seen many posts from you lately - how are you doing?   [Reply]   [No Email]
Britcheflee 10-28-2009 12:14:18 67.187.164.184 738794 Report to Moderator	Re: Jubilee...nice price...what about hydraulics in reply to Dell (WA), 10-28-2009 09:20:46   I am basically looking for a slightly larger and more powerful tractor with a 'live' hydraulic system - the system on the 8N is ok but sometimes can be a bit annoying with engaging/disengaging levers - this seems a good price to me and would work for me with the brush hog - I can use the other one for trailer work and the small blade I have for clearing the driveway. If it is or is not a 'confirmed' Jubilee really is not that important to me...I was just wondering what that comment was about. Lee   [Reply]   [No Email]