minniemo705
Member
Having a heck of a time finding leak. Long story short, both heads were replaced. With the old metal copper? gaskets we always were able to reuse them several times. This tractor had been worked on before I got it and has these newer fiber? gaskets. One I had to replace new cause it got mangled pulling head. The other one looked fine so I left it alone and reused it. Everything was good for two days of running- then tractor sat for 2 weeks and I just checked and water in oil. Obviously happened sometime the second day cause all the oil including in the filter was milk. I had checked before I started the second day (which is actually day 3 cause I ran it for several hours after replacing heads), and the oil was perfect. So question is do I go after the gasket I reused?