Author	[Modern View]
JERIC 01-18-2013 13:17:21 67.142.183.27 Report to Moderator	Not sure what tractor u are working on but this sounds familar with us. We had a moline with the same problem and had to tear it back down all the way. Depending on what it is u may need to tear the pan off to. [Reply]   [No Email]
oleclint 01-18-2013 18:25:30 69.8.14.205 Report to Moderator	Re: Got it running, Now a freezplug let go... in reply to JERIC, 01-18-2013 13:17:21   I mite have a new head gasket for a 705, I would have to look as I have a few new ones for my M-M s. I would be tempted to reuse the old gasket , covering it good with sealer. Prob would put a can of stop leak in to , just to be on the safe side. This was done on a UB L P G many years ago that blew a middle freeze plug: Clean out the groove where the plug sets, Braze or J B weld a new plug to an old screwdriver. Carefully work it into place , then take another old screwdriver and drive it in behind the first one , from the other side of the head, expanding the freeze plug. It is a good idea to cut the handels off , so no one will try to yank them out. I have gotten parts from this man up in Ill. He has M-M parts . Rob Odah, 815 379 2377. He should have head gaskets. If you want to chatt with me , call this no.in the evenings: 405 328 0081. clint [Reply]  [No Email]