|
| |
| Minneapolis Moline Tractors Discussion Forum |
Topic: roosa master problems
[Return to Forum]
| Author |
[Modern View]
|
| billy39
09-24-2012 20:21:02
174.252.19.4
|
Finally got the gvi home sunday. Was trying to get it running today and found that the pump isnt pumping . It has clean fresh fuel and is turning. The rack is free. I took it off and started looking for the problem but i dont have a book and sont want to go too far. Any help is greatly appreciated
|
|
|
| m-m john
09-26-2012 18:56:34
66.146.244.123
|
|
Re: roosa master problems in reply to billy39, 09-24-2012 20:21:02
|
|
| i had the same problem. i took the top off and filled i with power service and let it soak for two weeks.
|
|
|
| dieselbob
09-26-2012 04:47:52
64.72.183.79
|
|
Re: roosa master problems in reply to billy39, 09-24-2012 20:21:02
|
|
| That ring is for the gov acts like a shock absorber on the rotor you will see two rollers one on each side you can slide them off to the side with there shoe then you will see the plungers one on each side they need to be loose if even one is stuck it will not start remeber CLEAN when working on pumps. BOB
|
|
|
| dieselbob
09-25-2012 05:04:43
64.72.183.79
|
|
Re: roosa master problems in reply to billy39, 09-24-2012 20:21:02
|
|
| Did you check to see if there was fuel at pump? If you have fuel it could be a plug return fitting or line. When you pulled the pump I hope you tied the throttle shaft back becauce a gov weight can come out of place VERY IMPORTANT that is what they they told us in pump school years ago. If it is in the pump it could be the high preasure plungers stuck. good luck Bob
|
|
|
| billy39
09-25-2012 16:19:43
174.255.112.73
|
|
Re: roosa master problems in reply to dieselbob, 09-25-2012 05:04:43
|
|
| Yes i had plenty of fresh clean fuel to the pump. I took the lines off and made sure they were clear before i did anything. Tge tractor sat for 16 years i took the pump apart found what looks to be the remainder of the fiber coupler all over the inside of the pump.
|
|
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
