Author	[Modern View]
Cjet 09-13-2012 12:31:27 50.125.4.33 Report to Moderator	Has anyone found a place to get an oil filter for a UTS special? Mine has the filter in the pan so I can't use a spin on adapter. Engine tag # 283C-4 [Reply]   [No Email]
molinegb 09-17-2012 14:22:58 67.201.136.21 Report to Moderator	Re: MM UTS Special oil filter in reply to Cjet, 09-13-2012 12:31:27   I just ordered 2 10B6865's. I had one on shelf but needed a couple of spares.   [Reply]  [No Email]
mm-g706 09-18-2012 14:36:37 98.232.190.70 Report to Moderator	Re: MM UTS Special oil filter in reply to molinegb, 09-17-2012 14:22:58   MolineGB Where did u order the U special filters from thannks   [Reply]  [No Email]
westtxmm 09-16-2012 17:57:46 209.55.99.222 Report to Moderator	Re: MM UTS Special oil filter in reply to Cjet, 09-13-2012 12:31:27   Tom Barnes @ Henry Leasing had some filters made that should work. They are KE5905. I think they were about $17. Give him a try, beats changing everything out. -Doug   [Reply]  [No Email]
Cjet 09-14-2012 18:47:55 50.125.4.229 Report to Moderator	Re: MM UTS Special oil filter in reply to Cjet, 09-13-2012 12:31:27   Is the center hole in the napa filter 1118 the same as the original filter? Just wondering if the original retaining nut will work as is.   [Reply]  [No Email]
Cjet 09-13-2012 18:50:52 50.125.4.202 Report to Moderator	Re: MM UTS Special oil filter in reply to Cjet, 09-13-2012 12:31:27   Thanks Guy's. Off to the lathe to make an adapter.   [Reply]  [No Email]
westtxmm 09-13-2012 18:05:03 209.55.99.222 Report to Moderator	Re: MM UTS Special oil filter in reply to Cjet, 09-13-2012 12:31:27   Try the guys at Henry Leasing in Bakersfield,CA. (661) 395-3027. They helped me out. -Doug   [Reply]  [No Email]
mightymolinekid 09-13-2012 15:04:55 166.181.3.174 Report to Moderator	Re: MM UTS Special oil filter in reply to Cjet, 09-13-2012 12:31:27   I've looked all over for one for my UB Special diesel, with no luck. What I have learned though, is that a filter for a 670 can be made to work with a little engineering. I think they are shorter than the Special filters so you need a spacer to hold it tight to the back of the canister. I haven't tried it because it turns out that mine is missing the canister and original filter from inside the pan. At some point someone drilled into the main oil galley from the outside and mounted a homemade spin on adapter set up. So my remedy is to swap the pan and pump from a straight UB diesel, and the filters are available for that. Not original, but will work. How does the Special system work? I don't see in the pictures where the oil flows through the canister?   [Reply]  [No Email]
Cjet 09-13-2012 18:42:49 50.125.4.202 Report to Moderator	Re: MM UTS Special oil filter in reply to mightymolinekid, 09-13-2012 15:04:55   Here some pics of the cover. The oil flows into the cover, then thru a gallery to the filter, then out of the filter thru a return hole back to the pan. I believe I have the flow direction correct , but could be wrong. Maybe someone else can verify.   [Reply]  [No Email]
mm-g706 09-13-2012 14:58:10 98.232.190.70 Report to Moderator	Re: MM UTS Special oil filter in reply to Cjet, 09-13-2012 12:31:27   I had the same problem a while back. If you have a lathe you can make two adaptor that will fit the napa 1118 filter this is very simple with very little machining project. If any wants the drawing email me   [Reply]  [No Email]