|
| |
| Minneapolis Moline Tractors Discussion Forum |
Topic: U- MM with no oil press. Why??
[Return to Forum]
| Author |
[Modern View]
|
| mm585
09-11-2012 17:58:19
166.182.3.199
|
I have a single block U thats haunting me. With the line screwed out of the block I have oil flow but no pressure. I have cleaned out the screen on the bottom of the pump, changed oil and filter. Droped the pan and changed the oil pump, changed the compleat oil filter assy, and looked for a spun bearing. I have the screw on the regulator valve bottomed out and still no pressure. Has Anyone ever ran in to this? Thanks.
|
|
|
|
| mm585
09-12-2012 07:08:54
166.182.3.152
|
|
Re: U- MM with no oil press. Why?? in reply to mm585, 09-11-2012 17:58:19
|
|
| I didnt know that that check ball was there, Not only was the ball stuck the spiring was rusted in half. Freed up the ball, replaced the spring and I now have 25 lbs. of oil press. at idle thanks a million!
|
|
|
| kevin moschenrose
09-13-2012 07:34:08
74.34.90.76
|
|
Re: U- MM with no oil press. Why?? in reply to mm585, 09-12-2012 07:08:54
|
|
| You are most welcome! It is most like from condensation that causes that to happen while tractor is not in use.
|
|
|
| pmer
09-12-2012 05:31:19
166.156.116.29
|
|
Re: U- MM with no oil press. Why?? in reply to mm585, 09-11-2012 17:58:19
|
|
| | Dum question here, but did you try a different oil pressure gage? I didn't see in your post.
|
|
|
| kevin moschenrose
09-12-2012 01:20:25
74.34.90.76
|
|
Re: U- MM with no oil press. Why?? in reply to mm585, 09-11-2012 17:58:19
|
|
| Yes I found a stuck check ball in the filter base is what caused mine to do this.
|
|
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
