Author	[Modern View]
redgems 05-31-2012 20:20:12 204.14.163.20 Report to Moderator	Hello Gentlemen, Pulled utn into shop today removing hoods radiator etc getting ready for wash rack. I am low man on todem pole so I draw wash rack detail. I will enclude few pic's ,But tell me, Guys ,I am use to I.H. ,so, you need to tell me if whats on bottom of exhaust cap is supposed to be there?? Never saw this on any of the I.H's Best , Tony [Reply]   [No Email]
oleclint 05-31-2012 21:00:45 69.170.237.186 Report to Moderator	Re: Started MM Utn project today,pics in reply to redgems, 05-31-2012 20:20:12   Take care of that muffler , new repos are not cheap.The mess in the steering box looks about normal after settting out in the weather for a long time. When putting it together , make sure the gasket under the metal plate seals good to keep water and dirt out. Good luck with the cranking shaft removal.NAPA should have all the seals that you will need.I rebuilt a RTU frt end 3 yrs.ago, not to bad a job. Biggest prob was finding the two bearings on the worm shaft, odd ball brgs.Email if you want to . clint   [Reply]  [No Email]
redgems 05-31-2012 20:24:15 204.14.163.20 Report to Moderator	Re: Started MM Utn project today,pics in reply to redgems, 05-31-2012 20:20:12   Few more pics   [Reply]  [No Email]
redgems 05-31-2012 20:37:59 204.14.163.20 Report to Moderator	Re: Started MM Utn project today,pics in reply to redgems, 05-31-2012 20:24:15   The steering box surprised us it was full of water and everthing was rusted solid. Managed to get worm gear off,but the crank rod and big bearing nut is going to be fun they are pretty nasty with rust. Engine is loose we turned it over twice before popping fan belt. But from old dirt and old oil around breathers lead me to think its pretty wore out,must have had lot of blow by?? Let you know when I finish bathing her. Tony   [Reply]  [No Email]
Alan K 05-31-2012 21:07:24 50.33.3.216 Report to Moderator	Re: Started MM Utn project today,pics in reply to redgems, 05-31-2012 20:37:59   That is the first thing that came to mind when I saw the "extra" oil around the breathers. I think most of the steel plates under the radiator (one that covers the front end) on the U-UBs ended up rusting out. To me, for its age, on the outside, the tractor looks good.   [Reply]  [No Email]
t.r.k. 06-01-2012 19:04:34 71.31.64.233 Report to Moderator	Re: Started MM Utn project today,pics in reply to Alan K, 05-31-2012 21:07:24   I think Welters sells those steering gear cover plates. 417-498-6496.   [Reply]  [No Email]