(800) 853-2651
SHOP NOW

Did I install my seals...

G

Gilbert in IL.

Member
....backwards? Working on put`n back together the steering housing on our TO35. Just read dljohnson`s inquiry & now I`m scratch`n my head. I put the garter spring to the inside, Black part outside.The bottom gear(left clutch side)is leak`n a bit.....BTW, three cs, found a wormgear & played the ball bearing game....& WON!!!...lol
...fact, heres a little info for EVERY1, theres 60 BB`s that go in that sucker....where I got it (Sikeston salvage)said they called Massey & they didn`t know how many...anyway, `preciate know`n if I put those seals in Right or wrong....thanks again....
 
Well, then I put them in right, thats good but the bottom seal(for the left side)is leaking?!?!?Just checked to make sure their both the same seals & they are...833 455 M1.Any ideas how to stop this leak....appreciate any guidance
 
over time seals will ware a grove in the shaft so it will not seal as well put the seal a little deeper or shallower should help
 
Well, I used a round punch that I grinded the end flat,`probly 1/4" round, & lightly tapped it, ALL the way in though.Would maybe using my pocket knife(thick blade)be able to pry it out just enough to get out of the groove?JUST thought of this,the front tires were out of line,towed out & bad camber,`fact we`re think`n thats why the wormgear broke...Thank you again for your help Marlowe & any others that may have an idea...
 
You must log in or register to reply here.

Similar threads

G
Wanting to know you`all`s opinion on my FEL fix...
Replies
6
Views
1K
Gilbert in IL.
G
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top