Author	[Modern View]
Samuels68 12-25-2012 22:12:06 173.215.11.129 Report to Moderator	Hello all-- I recently acquired my grandfathers 20 industrial loader and am looking to get it running again. At this stage, the main problem appears to be electrical. Would anyone have a wiring schematic for this tractor, or know where I could get one? Also while I am asking questions, does anyone have any tips, tricks, or advice about these tractors? Hope everyone had a Merry Christmas and thanks in advance! [Reply]   [No Email]
Samuels68 02-05-2013 20:24:43 173.215.11.129 Report to Moderator	Re: MF 20 Ind wiring in reply to Samuels68, 12-25-2012 22:12:06   Dasmason, Chuck41 had a wiring diagram for me, and it was exactly what I needed, but as I got deepeer in to things, the factory wiring was so deteriorated that I ended up gutting and rewiring everything, using a rebuilt 1 wire alternator and eliminating the voltage regulator. It was actually simplere and took less time than the troubleshooting I did prior to that point. I don't know what your level of electrical knowledge is, or exactly how the 40 is set up, but I may be able to scan my hand drawn diagram that I used on my 20 and email it to you. If not Chuck41 will probably see this and reply, but if he doesn't, let me know and I'll email him, but I won't give out his email without his permission first. Good Luck! Jess [Reply]  [No Email]
Samuels68 12-27-2012 17:01:16 173.215.11.129 Report to Moderator	Re: MF 20 Ind wiring in reply to Samuels68, 12-25-2012 22:12:06   Chuck, Thanks for replying. Unfortunately, I don't have an owners manual for this machine. I have looked a little bit online for reprint manuals, but was unsure if I was getting the exact one for the Industrial 20 not a TO-20, etc. They were a little pricey and I wanted to be sure before I ordered them. If you wanted to email the appropriate diagrams, I would appreciate it greatly, or if you prefer to mail them, email me at samuels.jess@yahoo.com and I will give you my home address. Thanks so much! Jess [Reply]  [No Email]
chuck41 12-27-2012 16:17:32 216.105.235.78 Report to Moderator	Re: MF 20 Ind wiring in reply to Samuels68, 12-25-2012 22:12:06   I do have a schematic book which includes that model. But I don"t send to the site, but poss if you email me I can send, or send in mail. Do you not have an owners manual-it should be in there. Chuck [Reply]  [No Email]
dasmason 02-05-2013 11:15:35 72.161.162.79 Report to Moderator	Re: MF 20 Ind wiring in reply to chuck41, 12-27-2012 16:17:32   Hello, Im sorry to jump in on this thread like this, but Im needing a little help. I just got an Massey Ferguson 40 industrial and I am needing to rewire it. I saw that chuck41 said that he has some wireing diagrams. If you have it I would like to get a copy of it if possible. Thanks [Reply]  [No Email]
Samuels68 12-27-2012 15:02:03 173.215.11.129 Report to Moderator	Re: MF 20 Ind wiring in reply to Samuels68, 12-25-2012 22:12:06   Would I be safe then, in using a wiring diagram for a 135 with a Perkins gas engine? I think that may be easier to come by, and more readily available. [Reply]  [No Email]
Samuels68 12-26-2012 08:35:46 173.215.11.129 Report to Moderator	Re: MF 20 Ind wiring in reply to Samuels68, 12-25-2012 22:12:06   This particular tractor is a 3cyl Perkins gas model. [Reply]  [No Email]
Stick welding 12-25-2012 23:15:05 96.53.210.246 Report to Moderator	Re: MF 20 Ind wiring in reply to Samuels68, 12-25-2012 22:12:06   First, is it a gas or diesel? A 20 is basically an industrial 135. [Reply]  [No Email]