Author	[Modern View]
RGilland 12-05-2012 13:12:12 208.82.40.226 Report to Moderator	I have a 1977 MF 510 combine that is one of the last ones built and i would like to find a tractor that i could put this engine into. Everything is pointing to it being a 354 Prekins. I have seen that they could be swapped into the MF 1100, MF 1135 and the Oliver 1850 but i was wondering what else. [Reply]   [No Email]
rrlund 12-06-2012 11:51:58 207.241.137.116 Report to Moderator	Re: MF 510 Engine will go in what??????? in reply to RGilland, 12-05-2012 13:12:12   White 2-85,2-105.   [Reply]  [No Email]
massey 333 12-06-2012 06:00:42 209.173.189.232 Report to Moderator	Re: MF 510 Engine will go in what??????? in reply to RGilland, 12-05-2012 13:12:12   There was also a 372 put in the combines too.Don't know what block it is.   [Reply]  [No Email]
bp4455 12-06-2012 10:17:22 70.194.1.137 Report to Moderator	Re: MF 510 Engine will go in what??????? in reply to massey 333, 12-06-2012 06:00:42   i believe is just a naturally aspirated overbore of a 354 block   [Reply]  [No Email]
gbs 12-05-2012 18:29:28 68.115.212.154 Report to Moderator	Re: MF 510 Engine will go in what??????? in reply to RGilland, 12-05-2012 13:12:12   if i remember correct IH used them in some of there trucks i've driven a couple different ones with a 354 installed in them last was a military 2 1/2 ton gmc,is the 6 cyl used in the 399's still a 354 or not   [Reply]  [No Email]
johnpop1 12-05-2012 15:57:15 96.249.0.88 Report to Moderator	Re: MF 510 Engine will go in what??????? in reply to RGilland, 12-05-2012 13:12:12   A 354 may fit into the tractors mentioned, but, it isn't a straight swap. Working on putting a 354 combine engine into a 1135 and there are quite a few hurdles to overcome. It isn't a walk in the park but it is do able and getting done a step at a time. Good luck!   [Reply]  [No Email]