Author	[Modern View]
1130Leo 11-19-2012 09:45:37 12.188.165.254 Report to Moderator	The pumps continue to all fail the same, the diaphragm ends up with a hole in them, I'm guessing they are caused by rust debris making it past the glass bowl, I guess if I were to add yet another inline filter before the glass bowl, then maybe the filter would plug before getting the crud to the bowl and prevent the diaphragm from being destroyed? I Know i really need to remove the tank and have it cleaned properly, but that looks to be a huge job since there is a cab on the tractor as well. I really like the tractor, just do not like having continued issues with the lift pump. I have an email out for a quote on rebuild kits for the lift pump, if they are reasonable, I'm going to buy a few to have them onhand, maybe rebuild it every year in an attempt to prevent this. Frustrating for sure. [Reply]   [No Email]
danperkins 11-19-2012 16:23:31 70.197.204.220 Report to Moderator	Re: 1130 Lift Pump Replacement in reply to 1130Leo, 11-19-2012 09:45:37   I had the same problem with my 1150 and installed a pre-filter like you mentioned. It has a clear housing so you can see when it's getting dirty. I haven't had a lift pump problem since.   [Reply]  [No Email]
danperkins 11-19-2012 16:25:32 70.197.204.220 Report to Moderator	Re: 1130 Lift Pump Replacement in reply to danperkins, 11-19-2012 16:23:31   One other thing, if your tractor has a sediment bulb type filter, you shouldn't need any other pre-filter. Make sure the screen above the bulb is there and in good shape. That should prevent any dirt or rust going into the lift pump.   [Reply]  [No Email]
1130Leo 11-21-2012 11:49:45 12.188.165.254 Report to Moderator	Re: 1130 Lift Pump Replacement in reply to danperkins, 11-19-2012 16:25:32   It has the Glass Bowl, and I"ve replaced the entire assembly Twice already, would think the new one would have had the screen. I had sent an e-mail to one company requesting a quote on rebuild kit, hoping it was cheaper, but they have not replied, does anyone have a link to where I can buy a few rebuild kits?   [Reply]  [No Email]