Author [expand]	[Modern View]
MM ZAck 10-31-2009 13:00:59 71.237.172.74 108435 Report to Moderator	If I want to bore an F226 engine in a 101Sr to make a puller, how big of a piston is available? I know there is a larger size F244, but are there rebore kits for those that are available? Ideally, I'd like 4-7/16 +.060, so just about 4-1/2" bore. I know +.060 are available for an F162, which is a 4-7/16" stock bore. Could they be the same piston? Thanks, Zack [Reply]   [Send Email]
MM ZAck 11-04-2009 08:24:52 170.2.52.28 108528 Report to Moderator	Re: Boring an F226, how big and what pistons? in reply to MM ZAck, 10-31-2009 13:00:59   Whoops, I meant 3-7/16" +.060. Stock bore and stroke for the F226 is 3-5/16" x 4-3/8" and the F244 was 3-7/16" x 4-3/8". F162 pistons are 3-7/16" dia. Zack   [Reply]   [Send Email]
Jack Wonn 11-03-2009 22:43:38 207.200.116.71 108523 Report to Moderator	Re: Boring an F226, how big and what pistons? in reply to MM ZAck, 10-31-2009 13:00:59   How about 4 1/2" John Deere B pistons? I have a couple you could have. Oh wait, are you building another tractor to pull against me? LOL JW   [Reply]   [Send Email]
Kyle Ladowski 11-03-2009 07:15:55 206.40.119.80 108499 Report to Moderator	Re: Boring an F226, how big and what pistons? in reply to MM ZAck, 10-31-2009 13:00:59   I did one 10 years ago, bored and stroked to 285 cu in. Email me if you want more info. bbf468@yahoo dot com take out the spaces and replace dot with a . Kyle ladowski I still have some parts left.   [Reply]   [No Email]
ron8 11-01-2009 06:27:47 205.188.117.17 108454 Report to Moderator	Re: Boring an F226, how big and what pistons? in reply to MM ZAck, 10-31-2009 13:00:59   226 pistons were made in 060. no more. contact 210 967 5484 for parts   [Reply]   [No Email]