Author	[Modern View]
Stan - Florida 05-28-2008 10:02:56 205.188.117.136 Report to Moderator	Trumm & Zarse's book, "Encyclopedia of Construction & Farm Toys" shows a 2010 with a wide front end. It does not have side shields on the engine. Not having ever been around either a 1010 or a 2010, I don't know if there would be much difference in a 1/16 scale tractor. Dick's Farm Toy Price Guide does not show a 2010 other than the pricey ones from Nolt, Stephan, etc, but it does list a 2030, which is described as a "Utility, slant nose". I'm guessing that it is the same tractor as shown in Trumm & Zarse's book. Probably not much help, but one of these might be a quick solution to your problem. Stan Melbourne, FL [Reply]   [No Email]
jjamna 05-28-2008 10:17:06 68.155.201.224 Report to Moderator	Re: 1/16 John Deere 1010 in reply to Stan - Florida, 05-28-2008 10:02:56   Stan At this point any info I can get helps. I am not desperate but what I am trying to do is get a 1/16 scale of the tractors I own. I have all of them but the 1010. I have not found any 2010 either. So I will try the places you listed. [Reply]  [No Email]
Stan - Florida 05-28-2008 15:38:27 72.188.2.176 Report to Moderator	Re: 1/16 John Deere 1010 in reply to jjamna, 05-28-2008 10:17:06   I'm not sure what I gave you will help you find one, but at least you know a little more about what you're looking for. I have one of the tractors, whichever it is. I bought it an an antique store in Joplin, Mo back in early 1999. It has one chip in the paint on the left side of the hood, just above the manifold. The chip is approximately 1/8" in diameter. It is missing the solid stripe decal on the right side of the hood. I paid $38 for it, and would sell it for that plus shipping. If you're interested, I could take some pictures and e-mail them to you. If interested, send me an e-mail at stanhuff@aol.com. Stan [Reply]  [No Email]