tj3

New User
I'd like to find a picture of a 4020 with the type of cab my dad and Uncle had on there 4020. It must not be very common as I can't fine any pictures like it on the web. This was and earlier 4020 with what I thought was a "factory" cab. It was fairly large and luxurious for its time. Interior was covered in carpet. it had two side by side windows in the back and on each side. The door was approximately 1/3 of the front of the cab/window and a large window made up the other 2/3. The cab had its own fenders attached, the tractor did not have the factor rear fenders. I have a lot of memories riding along in this tractor for hours while plowing or disking. Usually I would some how manage to fall asleep. :)
 

JD utilized cabs made by several different companies. This is one built by Stolpler

mvphoto4771.jpg

There was a model built by Crenlo
mvphoto4773.gif

Here's an aftermarket model built by Year-A -Round
mvphoto4774.jpg
 
It's none of these


(quoted from post at 18:51:03 03/14/14) I'd like to find a picture of a 4020 with the type of cab my dad and Uncle had on there 4020. It must not be very common as I can't fine any pictures like it on the web. This was and earlier 4020 with what I thought was a "factory" cab. It was fairly large and luxurious for its time. Interior was covered in carpet. it had two side by side windows in the back and on each side. The door was approximately 1/3 of the front of the cab/window and a large window made up the other 2/3. The cab had its own fenders attached, the tractor did not have the factor rear fenders. I have a lot of memories riding along in this tractor for hours while plowing or disking. Usually I would some how manage to fall asleep. :)
 
This is Cab, Deere shown & offered in it's Genuine JD parts, mail out catalogs from 64" to 67" .. I'm thinking it was manf. by Crenlo also ,but before the big box cab Tx Jim printed from parts cat. below...... Stolper Roll-Guard cab is shown in 68" Genuine JD parts...
a149576.jpg
 
The way you describe the front sounds like a sound-guard, but they had one window each sides and back, that swung out at the bottom. And it's a lot of work to adapt one over.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top