Author	[Modern View]
df 02-25-2013 13:44:47 64.12.117.12 Report to Moderator	Will a third remote off of a 4040 work on a 4020? [Reply]   [No Email]
DaveH IA 02-26-2013 04:55:36 71.7.102.199 Report to Moderator	Re: 4040 3rd remote valve to a 4020 in reply to df, 02-25-2013 13:44:47   The Valve will work but you will need a different mounting plate and linkage.If you have a late model 4020 This post was edited by DaveH IA at 04:57:07 02/26/13. [Reply]  [No Email]
Tx Jim 02-26-2013 12:56:12 67.142.163.21 Report to Moderator	Re: 4040 3rd remote valve to a 4020 in reply to DaveH IA, 02-26-2013 04:55:36   DaveH IA said: (quoted from post at 07:55:36 02/26/13) but you will need a different mounting plate and linkage. Dave I have a question will either plate work for all models listed?? From my brief research I think either plate will fit. I understand one of these plates will be required to take the place of plate AR73897 AR73899 fits the following tractors 4030 Tractor - 16May11 4040, 4240 and 4440 Tractors (North American Edition) - 16May11 ( FR DE ) and AR71188 fits the following tractors 4000 and 4020 (s.n. 201,000- ) Tractors - 20May11 4030 Tractor - 16May11 This post was edited by Tx Jim at 13:04:02 02/26/13. [Reply]  [No Email]
DaveH IA 02-26-2013 13:44:33 71.7.102.199 Report to Moderator	Re: 4040 3rd remote valve to a 4020 in reply to Tx Jim, 02-26-2013 12:56:12   Quoting Removed, click Modern View to see The thin plate for the 4020/3020 will fit early 4430/4630/4230/4030---later ser# take the thick plate with the valving in it----they wont interchange ( don't ask how I know) [Reply]  [No Email]
Tx Jim 02-26-2013 14:25:08 67.142.163.20 Report to Moderator	Re: 4040 3rd remote valve to a 4020 in reply to DaveH IA, 02-26-2013 13:44:33   Dave So how does the plate(AR73899) with the valve enter the picture? Why won't the interchange? If I'm correct either one of these plates( parts key #3 R50065 or R59080) for delete scv will fit 4020 or 30 series. Same plate should fit 40 series but I failed to locate it or another in 40 series PC. Thanks,Jim This post was edited by Tx Jim at 14:26:22 02/26/13. [Reply]  [No Email]
DaveH IA 02-26-2013 17:37:48 71.7.102.199 Report to Moderator	Re: 4040 3rd remote valve to a 4020 in reply to Tx Jim, 02-26-2013 14:25:08   Quoting Removed, click Modern View to see Well your taxing my memory-- the thick plate is to direct return oil on a single acting clyinder-the valve housing is ported different.The early 30 series and 20 sereis is the same -- on the delete plate it might work but I'm not sure ---somewhere in about 74 ? there was another plate from a service up date we instaled that had a hose plumbed to the plug on the back( where you set the draft control) to work with the manual by-pass valve-- then they went to the thick plate---have I got you more confused? [Reply]  [No Email]
Tx Jim 02-27-2013 03:53:38 67.142.163.24 Report to Moderator	Re: 4040 3rd remote valve to a 4020 in reply to DaveH IA, 02-26-2013 17:37:48   Thanks Dave. [Reply]  [No Email]
Tx Jim 02-25-2013 14:18:12 67.142.163.23 Report to Moderator	Re: 4040 3rd remote valve to a 4020 in reply to df, 02-25-2013 13:44:47   Yes if the 4020's SN is >201,000 [Reply]  [No Email]
Df 02-25-2013 14:29:19 74.242.234.79 Report to Moderator	Re: 4040 3rd remote valve to a 4020 in reply to Tx Jim, 02-25-2013 14:18:12   Will the linkage also work? [Reply]  [No Email]
Kent Petersen 02-25-2013 15:03:10 209.62.225.173 Report to Moderator	Re: 4040 3rd remote valve to a 4020 in reply to Df, 02-25-2013 14:29:19   No you will need 4020 linkage [Reply]  [No Email]
df 02-26-2013 06:36:30 64.12.117.12 Report to Moderator	Re: 4040 3rd remote valve to a 4020 in reply to Kent Petersen, 02-25-2013 15:03:10   OK thanks to all. [Reply]  [No Email]