Author	[Modern View]
fullthrotle 02-15-2013 08:20:15 70.193.65.187 Report to Moderator	HELP! Looking for a cylinder liner plate and one Std. piston for JD 2010 diesel. Plate JD # AT15762. Piston casting # T19063T. [Reply]   [No Email]
Ray 02-15-2013 10:58:19 74.5.145.85 Report to Moderator	Re: 2010 liner plate in reply to fullthrotle, 02-15-2013 08:20:15   I've got a short block off a 1010 diesel.It was a complete running engine,but i used the head for another tractor.I'll take 500 for the whole thing. [Reply]  [No Email]
MSD 02-15-2013 09:07:06 71.209.114.142 Report to Moderator	Re: 2010 liner plate in reply to fullthrotle, 02-15-2013 08:20:15   Be careful buying a used one. If they are not taken out properly, the sleeves will crack where they attach to the deck. [Reply]  [No Email]
fullthrotle 02-15-2013 08:46:39 70.193.65.187 Report to Moderator	Re: 2010 liner plate in reply to fullthrotle, 02-15-2013 08:20:15   Thanks "old." Costs $1235 now. Ouch! Gotta find this one used. [Reply]  [No Email]
green northern lights 02-15-2013 15:33:05 66.103.165.171 Report to Moderator	Re: 2010 liner plate in reply to fullthrotle, 02-15-2013 08:46:39   Another option (if you ha"nt pulled sleeve plate out yet, or it is"nt cracked) is rebore. I did mine 12 or 15 yr. back, Got 40 or 45 (Can"t remember exact size) oversize aftermarket pistons, went togetter great , still running; really made a engine out of it... [Reply]  [No Email]
old 02-15-2013 08:53:39 209.86.226.59 Report to Moderator	Re: 2010 liner plate in reply to fullthrotle, 02-15-2013 08:46:39   If you needed a block or head or other such things I could help you but I sold the sleeve set years ago out of a 1010 I have here that is just parts. You now know why I always tell people to run do not walk away from the 1010 and 2010 parts are high it you can find them and they are not easy to work on [Reply]  [No Email]
Tim S 02-15-2013 10:47:40 75.49.0.58 Report to Moderator	Re: 2010 liner plate in reply to old, 02-15-2013 08:53:39   1010 and 2010"s should all have a "Do not resuscitate" sign hanging on them... [Reply]  [No Email]
Tx Jim 02-15-2013 11:19:37 67.142.163.20 Report to Moderator	Re: 2010 liner plate in reply to Tim S, 02-15-2013 10:47:40   Quoting Removed, click Modern View to see Tim you're correct. JD should have recalled all of them but they didn't. [Reply]  [No Email]
Cliff Nelson 02-15-2013 11:24:24 69.21.97.161 Report to Moderator	Re: 2010 liner plate in reply to Tx Jim, 02-15-2013 11:19:37   Deere should have driven them out of the dubuque plant and right into the river. Would have saved a lot of headaches. [Reply]  [No Email]
old 02-15-2013 12:24:43 209.86.226.56 Report to Moderator	Re: 2010 liner plate in reply to Cliff Nelson, 02-15-2013 11:24:24   No they should have driven them right the the scrap guy so they could be recycled before they became head aches. At least doing it that way would not have polluted things and maybe they would have made good tractor for the people of China [Reply]  [No Email]
old 02-15-2013 08:31:14 209.86.226.59 Report to Moderator	Re: 2010 liner plate in reply to fullthrotle, 02-15-2013 08:20:15   I check a few years ago at JD and they could still get them but boy oh boy do they want the $$ to get one and it is special order to boot. I think back then it was $500 plus just for the sleeve set [Reply]  [No Email]