Author	[Modern View]
Wanna be Mechanic 02-11-2013 10:11:55 208.124.118.198 Report to Moderator	I've got a John Deere LUC engine field dressed in the shop right now and I'm trying to figure out how to cross reference the seals. They have Deere part numbers on them? I'd assume any NAPA could probably get them for you if there was a way to cross reference it. Anybody have any help on this? Anyone ever did this? Thanks in advance!!! [Reply]   [No Email]
MSD 02-11-2013 17:18:46 67.4.60.129 Report to Moderator	Re: Cross Reference Help? John Deere Seals? in reply to Wanna be Mechanic, 02-11-2013 10:11:55   Got the numbers. I have a cross reference book for JD seals. [Reply]  [No Email]
Wannabe Mechanic 02-12-2013 20:19:16 208.124.71.33 Report to Moderator	Re: Cross Reference Help? John Deere Seals? in reply to MSD, 02-11-2013 17:18:46   Here are my numbers from the parts book. I tried Deere and they said they didn't have anything. Boy, I sure appreciate the help guys! AL 2654 Oil Seal AL 2653 Oil Seal AL20186T Oil Seal AL2094T Oil Seal [Reply]  [No Email]
Bob 02-13-2013 08:32:26 64.255.159.192 Report to Moderator	Re: Cross Reference Help? John Deere Seals? in reply to Wannabe Mechanic, 02-12-2013 20:19:16   AL2654... SKF/CR #34967 AL2653... SKF/CR #11343 AL20186T... SKF/CR #5606 AL2094T... SKF/CR #13649 So you don't have to beg the NAPA guys for help the next time... [Reply]  [No Email]
HOTFLASHJR 02-11-2013 14:53:52 66.189.21.110 Report to Moderator	Re: Cross Reference Help? John Deere Seals? in reply to Wanna be Mechanic, 02-11-2013 10:11:55   Stick with Deere. On my LA engine rebuild Deere had everythig I needed. My local Napa wouldn't give me the time to cross the part numbers. The few they did were more money. [Reply]  [No Email]
Mike M 02-11-2013 10:45:02 24.140.0.120 Report to Moderator	Re: Cross Reference Help? John Deere Seals? in reply to Wanna be Mechanic, 02-11-2013 10:11:55   "field dressed" Ha,HA !!! I like that !!! Most of the JD seal numbers can be crossed in seal catalogs. Every once in awhile you will find one that was special made and even JD doesn't even sell it anymore too. I always do check price with JD as sometimes (not always) they are the best price on fast moving common items. [Reply]  [No Email]
Barry Ayres 02-11-2013 14:34:45 86.134.71.179 Report to Moderator	Re: Cross Reference Help? John Deere Seals? in reply to Mike M, 02-11-2013 10:45:02   If you are looking for crankshaft seals i think you may struggle with the rear. i ended up getting a seal with the same internal dimension and depth but smaller outside dimension then spun up an aluminium spacer to press into the housing. hope this helps I may be able to dig yp some photo's or sizes if it is of any help. barry [Reply]  [No Email]