Author	[Modern View]
Tim S 02-06-2013 18:57:31 75.49.18.100 Report to Moderator	I'll help with the recipe..I've been drawing on a 4020 PS crawler/450C chassis..flipping the ring gear to get the direction right,making an adapter and new axles to mate with the final drives,,leaving the rock shaft/3pt on to run a 4 bottom roll over plow...."BUT" I'm gonna play with my 60C this summer :^) [Reply]   [No Email]
bigboreG 02-07-2013 05:04:09 166.181.3.47 Report to Moderator	Re: Tim S in reply to Tim S, 02-06-2013 18:57:31   sounds like a lot of work. all work and no play makes Jack a dull boy. . . you better have some fun this summer, there's always next winter! [Reply]  [No Email]
Tim S 02-07-2013 05:23:21 75.49.18.100 Report to Moderator	Re: Tim S in reply to bigboreG, 02-07-2013 05:04:09   Actually I think it would be easier than this 60C was...I have been developing a ratio pattern from some of these transmission jobs lately to gain an idea on ground speeds,,and I'm not sure how to deal with the load depth arm to keep the 3pt alive,,when I flip the ring gear that follower arm will need to go....I have entertained a high crop final drive system....that would reverse my drive train...a lot of stuff to think about,,I like this kind of stuf better than cross word puzzles.. [Reply]  [No Email]
Bob Harvey 02-07-2013 16:34:00 209.121.225.145 Report to Moderator	Re: Tim S in reply to Tim S, 02-07-2013 05:23:21   Tim, go back aways and remember 'Monty Python' = "my brain hurts" ! ;^) [Reply]  [No Email]