Topic: Re: 3020 syncro trans
|John Deere Tractors Discussion Forum|
[Show Entire Topic] [Return to Forum]
[Show Entire Topic]
[Return to Forum]
[Add a Reply]
When the bushings and yokes get worn the shift gates get out of alignment,,this will show up like yours is acting,,pull the cowl off and get a hold on the outer quadrant and shake it around, then pull the shifter down to the 5th gear spot and rock the lever left and right ,,as you look into the center you will see the "Latch" cam back and forth, the purpose of the "latch" is to hold one quadrant in place while the other seeks the gear you after..and the actual pivot pin can work loose and wallow the housing out too, this creates a new problem. But removing the shifter and replacing "ALL" the bushings and nylon shims, as well as the yokes and pins ,and of course the center pivot it's self (you can built the shift lever up with weld and grind it back to shape to save some $$),all this will help tighten things up good,,another good idea is to squirt a shot oil down in there every now and then...I'll post a shifter re-build parts list after bit,,most younger parts guys don't know what is needed,,some days I am jealous of their youth,,,but most days I appreciate our experience..
[Reply] [No Email]|
|Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ]|
| Copyright © 1997-2013 Yesterday's Tractor Co.|
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
|About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.|