Author	[Modern View]
buickanddeere 01-07-2013 11:40:06 184.151.61.231 Report to Moderator	The proper carb? The late 440 gassers had a souped up engine with a larger carb. Where and how have you been adjusting the carb screws? Fuel flow to the carb bowl from the tank and filter? Have you tested hydraulic pressure and flow to verify if the pump is the problem? Or if lines, valves or hydraulic rams are the problem? [Reply]   [No Email]
dave cirasuolo 01-07-2013 13:00:14 67.249.184.35 Report to Moderator	Re: john deere 440I help in reply to buickanddeere, 01-07-2013 11:40:06   the carb was new by the previous owner, i dont know if or how he adjusted it. the flow seems to be good, bowl is always full and if gas is on while tractor is not running, it will keep flowing. how do i test hydraulic pressure? the previous owner seems to think there is blockage from a silicon seal he put on, but i wouldnt think it would affect the whole system, i would think it would be centralized to say just the bucket or just the backhoe, not the bucket,backhoe,braces, etc.... the whole system is slow. thanks for the information [Reply]  [No Email]