|
| |
| John Deere Tractors Discussion Forum |
Topic: Re: roosa master pump
[Show Entire Topic] [Return to Forum]
| Author |
[Modern View]
|
| LJD
12-03-2012 05:44:06
75.213.134.223
|
You're not missing anything. The big o-ring is stuck and you've got to jar the housing loose from the head & rotor assembly. Screw those banjo bolts in a bit and try to wedge a small pry bar between the heads of those bolts and the end of the aluminum housing.I don't remove all the parts that you did. I leave the back transfer-pump cover on the end of the head & rotor. You can clamp the end of it in a vise (gently) and have the pump upside down. Then by hand, you can twist the aluminun housing back and forth as you pull up. When you get ready to put the pump together - put that end cover back on the head & rotor first - before putting the housing back on. After torquing the four screws -rotate the rotor by hand and verify nothing inside that transfer pump is binding.
|
|
[Reply] [No Email] | |
| todd wiscal
12-04-2012 07:21:03
71.197.65.237
|
|
[Show Entire Topic]
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
