Author	[Modern View]
F-I-T 11-16-2012 16:20:14 184.6.247.3 Report to Moderator	gunther9 said: (quoted from post at 17:02:01 11/16/12) Frank, you are a gem. I'll get the newer manual. I got it all apart and the dowels are flush with the outer edges but the one closest to the worm gear is worn flat on one edge. I'll post a few more pictures and see what you think. You can probably skip that manual. I think I have enough info from an I&T book that will get you by. You'll need to have access to a decent dial indicator to set the helix slot play and you'll need a couple pins, as they all do by now, and then you'll need to post some pictures of the condition of the two cam forms. Betting there is a divot that keeps the pins from running smoothly up and down the form. This post was edited by F-I-T at 16:22:10 11/16/12. [Reply]   [No Email]
gunther9 11-16-2012 18:33:06 72.14.16.178 Report to Moderator	Re: 60 Power Steering actuating sleeve/worm gear disassembly in reply to F-I-T, 11-16-2012 16:20:14   I'll take a few pics tomorrow. I'll start a new thread and post them tomorrow, I can also call Deere tomorrow and get the pins on order. Thanks. [Reply]  [No Email]