Author	[Modern View]
swissman 11-13-2012 10:41:15 184.20.160.211 Report to Moderator	I have a 146 jd loader(with mounting brackets) and was trying to get info on what tractors this could be used on.I believe it came off a 2030 utility.Any help would be appreciated. [Reply]   [No Email]
Tx Jim 11-15-2012 03:43:16 67.142.163.22 Report to Moderator	Re: JD 146 loader in reply to Mike M, 11-13-2012 10:41:15   Quoting Removed, click Modern View to see That mast # AW16036 also fits a 145 loader BUT that doesn't indicate that JD engineers intended or designed the ""frame mounts on a 145/146 loader"" to work on a Waterloo rowcrop tractor. [Reply]  [No Email]
Tx Jim 11-14-2012 05:39:11 67.142.163.27 Report to Moderator	Re: JD 146 loader in reply to Tim S, 11-13-2012 10:41:15   Quoting Removed, click Modern View to see Loader that JD engineers deemed to be constructed heavy enough for hp had mounts for both Waterloo and utility tractors but NOT ALL loaders were built that way. [Reply]  [No Email]
Tx Jim 11-14-2012 03:57:32 67.142.163.27 Report to Moderator	Re: JD 146 loader in reply to mike.l, 11-13-2012 10:41:15   Quoting Removed, click Modern View to see 146 had 2 bucket cylinders but a 48 had 1 bucket cyl. [Reply]  [No Email]
Tx Jim 11-14-2012 03:54:27 67.142.163.27 Report to Moderator	Re: JD 146 loader in reply to Maark, 11-13-2012 10:41:15   buickanddeere said: (quoted from post at 16:04:16 11/13/12) There were both Waterloo and Dubuque/Mannheim frame mounts for the same 146 loader. Info is on the JD web site parts list.. Glen Could you please post the page number that a Waterloo tractor is referred to in the 146 PC??????????? I saw no place that Waterloo was mentioned. These are the footnotes on the bottom of a mounting listing. (A) With roll guard(B) without roll guard (C) Tractor with sound guard body(D) Tractor without sound guard body(E) With heavy duty axle (F) These frames fit all 4 cylinder tractors except sound-guard body This is definitely not Waterloo 28 - Tractor to Loader Control Valve ( - 027000) And neither is this.29 - Tractor to Loader Control Valve (027001 - ) This post was edited by Tx Jim at 04:00:42 11/14/12. [Reply]  [No Email]
buickanddeere 11-14-2012 19:55:22 209.240.114.216 Report to Moderator	Re: JD 146 loader in reply to Tx Jim, 11-14-2012 03:54:27   Took some looking but......... The 148 loader uses the same mast PN # AW16036 The model 148 loader mounts to Waterloo tractors with frame #'s AW16346 and AW16347 [Reply]  [No Email]
buickanddeere 11-14-2012 04:41:51 184.151.63.162 Report to Moderator	Re: JD 146 loader in reply to Tx Jim, 11-14-2012 03:54:27   I'll take a look tonight but would be surprised if there was not both Waterloo and Mannheim/Dubuque mounts for the 146. Just about every other loader shared mounts. [Reply]  [No Email]
hover 11-14-2012 00:33:02 107.27.44.60 Report to Moderator	Re: JD 146 loader in reply to swissman, 11-13-2012 10:41:15   I have a 146 loader on a 2440 the 2030 is the same tracter one model older [Reply]  [No Email]
4020_1966 11-13-2012 17:22:16 184.20.216.154 Report to Moderator	Re: JD 146 loader in reply to swissman, 11-13-2012 10:41:15   My uncle has a 146 on a 4020, its just a 1 cylander version of the 148. [Reply]  [No Email]
Dave H 11-13-2012 15:00:03 66.116.31.112 Report to Moderator	Re: JD 146 loader in reply to swissman, 11-13-2012 10:41:15   I swear my nieghbor has one mounted on a 4040. [Reply]  [No Email]
buickanddeere 11-13-2012 12:04:16 184.151.61.245 Report to Moderator	Re: JD 146 loader in reply to swissman, 11-13-2012 10:41:15   There were both Waterloo and Dubuque/Mannheim frame mounts for the same 146 loader. Info is on the JD web site parts list. The hydraulic connections on a Dubuque/Mannheim have to be correct or the loader operates slow and with noisy shudders. [Reply]  [No Email]
woodbutcher 11-14-2012 03:45:59 38.107.192.201 Report to Moderator	Re: JD 146 loader in reply to buickanddeere, 11-13-2012 12:04:16   Hey, B&D, I think my 2040 has a 148 on it. All the decals have been scraped off. On a cold start-up, the fel shudders when I raise it. What are the proper connections you refer to? Butch [Reply]  [No Email]
buickandeere 11-14-2012 04:48:07 184.151.63.162 Report to Moderator	Re: JD 146 loader in reply to woodbutcher, 11-14-2012 03:45:59   Loader control valve oil supply needs to be T'd into the rockshaft/SCV supply line. Loader return oil must be returned to a ported transmission oil filter cover. Otherwise the SCV's will be tied up and not available for use. Worse the front oil pump will be starved for supply oil which causes cavitation. The loader will operate faster and smoother when properly connected. [Reply]  [No Email]
woodbutcher 11-14-2012 12:39:34 38.107.192.201 Report to Moderator	Re: JD 146 loader in reply to buickandeere, 11-14-2012 04:48:07   Thanks. [Reply]  [No Email]
Tx Jim 11-13-2012 11:54:31 67.142.163.24 Report to Moderator	Re: JD 146 loader in reply to AM in Illinois, 11-13-2012 10:41:15   It should fit all JD 4 cyl utility tractors built in Dubuque/Mannheim factories. [Reply]  [No Email]