Author	[Modern View]
Farmallb 11-01-2012 13:01:39 67.142.178.24 Report to Moderator	Ive tried all I know, including cracking the pot metal inside the friction disc. Im thinking of sending a print out of the assembly to my biker SIL. hes a good machanic, where Im lousy at it. IF anybody can send a printout to him, please let me know and ill send you his E mail. Thanks. He may have ideas I havnt thought of, OR maybe we can tag team it together. " [Reply]   [No Email]
44B@Ohio 11-01-2012 18:45:26 140.228.34.183 Report to Moderator	Re: Help with installing Fan assembly on 39 A in reply to Farmallb, 11-01-2012 13:01:39   http://jdpc.deere.com/jdpc/servlet/com.deere.u90490.partscatalog.view.servlets.HomePageServlet_Alt This is the link for the parts country website. scroll down to number 675. thats the manual for 1939 and up A"s Untitled URL Link [Reply]  [No Email]
Mike M 11-01-2012 13:48:30 24.140.0.120 Report to Moderator	Re: Help with installing Fan assembly on 39 A in reply to Farmallb, 11-01-2012 13:01:39   Question ? Did you start out with a rubber mounted fan hub and then are now switching over to the friction disk type ? [Reply]  [No Email]
Farmallb 11-01-2012 14:06:11 67.142.178.23 Report to Moderator	Re: Help with installing Fan assembly on 39 A in reply to Mike M, 11-01-2012 13:48:30   There was no rubber mounted on anything. There were no friction pads. This was a parts tractor, and I bought the parts as I saw them on the I & T manual that I didnt have. All Ive got is the 2 friction discs, spring pulley and fan, and keeper. [Reply]  [No Email]
Farmallb 11-01-2012 14:38:02 67.142.178.23 Report to Moderator	Re: Help with installing Fan assembly on 39 A in reply to Farmallb, 11-01-2012 14:06:11   Well, I finally figured out a way that ought to work. I backed my H up to my post vice mounted on a stump. I was going to lay the shaft on the axle and put the pulley and end friction disc in the vice, and put my C clamp on top and bring it in. Went to look for the keepers, and there gone. Tractors been setting outside for 2 yrs. Under trees. All kinds of leaves and grass. I couldnt find one outa 3 parts with 2 magnets. SO Is that a special part, or can I get it somewhere. If so, Whats the sizes? [Reply]  [No Email]
Mike M 11-02-2012 05:23:33 24.140.0.120 Report to Moderator	Re: Help with installing Fan assembly on 39 A in reply to Farmallb, 11-01-2012 14:38:02   Two C-clamps as to draw it up evenly with very litte pressure is all that is needed to assemble one. Something is just not correct. Likely mismatched parts. [Reply]  [No Email]
husker44a 11-01-2012 13:35:08 8.28.70.17 Report to Moderator	Re: Help with installing Fan assembly on 39 A in reply to Farmallb, 11-01-2012 13:01:39   Do you need a parts breakdown or a book? Parts book can be had at WWW.JDPARTS . Others will chime in. [Reply]  [No Email]