Author	[Modern View]
farmallday 10-22-2012 12:04:14 184.21.113.230 Report to Moderator	what is the fix for a sloppy flywheel on my 52 A?? The splines on the crank look good but is there a way to see if theres slop on the crank?? Splines not to good on the fly wheel. Tired of the banging noises!! [Reply]   [No Email]
55deere70 10-23-2012 17:23:00 75.138.191.254 Report to Moderator	Re: JD A flywheel in reply to farmallday, 10-22-2012 12:04:14   Do yourself a favor and look into getting a taper lock flywheel for your A. We went through 2 factory flywheels on our 70G before we put one on with a taper lock. I can't remember who we got it from. I think it was from a guy in TN maybe. I know he had new flywheels, converted factory ones, or he would convert yours if it was sound. This post was edited by 55deere70 at 17:23:43 10/23/12. [Reply]  [No Email]
jdfun 10-23-2012 06:00:30 69.95.62.235 Report to Moderator	Re: JD A flywheel in reply to farmallday, 10-22-2012 12:04:14   I have several flywheels available for $150 each.I'm located in south east Missouri.Call 573 535 8952. Thanks , Tom. [Reply]  [No Email]
husker44a 10-22-2012 12:34:46 8.28.70.17 Report to Moderator	Re: JD A flywheel in reply to farmallday, 10-22-2012 12:04:14   If your lucky the f/w splines are not too damaged and still be able to set the crankshaft endplay. Put a bottle jack between the clutch and tire. Light pressure to hold crank to the f/w side of tractor. Then loosen the clamping bolts and tightening the big nut on the outside of flywheel to set end play. I think you want about 5 to12 thousandths play. Or side to side movement. [Reply]  [No Email]
farmallday 10-22-2012 12:40:13 184.21.113.230 Report to Moderator	Re: JD A flywheel in reply to husker44a, 10-22-2012 12:34:46   thanks for the reply But will this do anything for the front to back movement or dose having front to back play mean that the flywheel is well slopped out?? [Reply]  [No Email]
Kent Petersen 10-22-2012 13:43:22 209.62.234.145 Report to Moderator	Re: JD A flywheel in reply to farmallday, 10-22-2012 12:40:13   The flywheel is junk and the splines on the crank may need to be bult up and turned back to std. i have a flywheel for if you are interted .i am in eastern Soutn Dakota [Reply]  [No Email]
farmallday 10-22-2012 15:06:00 184.21.113.230 Report to Moderator	Re: JD A flywheel in reply to Kent Petersen, 10-22-2012 13:43:22   what is a flywheel worth?? [Reply]  [No Email]