Author	[Modern View]
ssgshelton 09-28-2012 14:03:11 50.55.47.141 Report to Moderator	This message is a reply to an archived post by SMinWi on March 22, 2009 at 08:24:40. The original subject was "How to repair your FloatRide Seat". Hi I found this post in the archives. I am doing my 720 float ride seat now and was wondering if someone could repost the pictures in this topic. Thanks Joel [Reply]   [No Email]
MSD 09-28-2012 22:07:53 67.4.59.86 Report to Moderator	Re: How to repair your Float-Ride Seat in reply to ssgshelton, 09-28-2012 14:03:11   Know any French? If not now you will by the time your done! [Reply]  [No Email]
BushogPapa 09-28-2012 21:25:21 173.88.51.117 Report to Moderator	Re: How to repair your Float-Ride Seat in reply to ssgshelton, 09-28-2012 14:03:11   If it is your 1st time, Leave the Coffee alone, have a bottle of Echo-Spring ready and TAKE MORE pictures than you think you need, before and as you take it apart..!! Pay attention to the relationship between the mounted rubber (old) springs and that Cross-Bar between them..it will NOT look the same, with the new springs, as they are not twisted like the old ones.. There is a RIGHT and a LEFT spring...Mark the old parts as you go.. Connecting that cross-bar puts a Pre-Load on the rubber springs..SO enjoyable, trying to get them engaged..!! Lube (Grease) the pivots as you assemble them.. Ron.. [Reply]  [No Email]
oakley21550 09-28-2012 17:11:13 204.111.217.123 Report to Moderator	Re: How to repair your Float-Ride Seat in reply to ssgshelton, 09-28-2012 14:03:11   Look up 1/25/12 JD 630 float ride seat repair question-followup-almost done. Didn't know how to attach this posting to your question. [Reply]  [No Email]