Author	[Modern View]
toolz 09-19-2012 20:35:07 206.221.154.149 Report to Moderator	I"m using a 404D out of an early 7700 combine for my 4020. It has two spin-on fuel filters on the left side near the front, but the numbers are faded away. I"ve looked on the JD parts site, but nothing like what I have. Anybody know what the filter numbers are? [Reply]   [No Email]
Tx Jim 09-21-2012 03:43:17 67.142.163.21 Report to Moderator	Re: 7700 fuel filters in reply to Paul Gi., 09-19-2012 20:35:07   Quoting Removed, click Modern View to see Toolz AR45098 was the number I listed in my first reply. If one enters AR45098 in the part number search box on a 7700 combine this pops up "No search results found". [Reply]  [No Email]
Tx Jim 09-20-2012 09:26:05 67.142.163.21 Report to Moderator	Re: 7700 fuel filters in reply to Tx Jim, 09-19-2012 20:35:07   husker44a said: (quoted from post at 10:34:45 09/20/12) Toolz You must get fuel filters for the 7700 NOT THE 4020. The only fuel filter I found for a 7700 other than the "for export" was the AR50041 filter. The canister filter is AP27688 FILTER ELEMENT This post was edited by Tx Jim at 09:28:10 09/20/12. [Reply]  [No Email]
Tx Jim 09-20-2012 04:07:34 67.142.163.25 Report to Moderator	Re: 7700 fuel filters in reply to young gun, 09-19-2012 20:35:07   If you're referring to pre '69 factory 4020 fuel filters here's the part number AR45098 FUEL FILTER ADD 9.05 USD 18.10 USD BTW all the 4020's I've seen had the fuel filters on RH side of engine not LH side. But if you're referring to filters for a 7700 combine engine the ones for export was all I found that utilized a canister type fuel filter. [Reply]  [No Email]
toolz 09-20-2012 06:50:53 206.221.154.149 Report to Moderator	Re: 7700 fuel filters in reply to Tx Jim, 09-20-2012 04:07:34   This is an early 7700 engine, and the filters are not canister type- they are spin-on, two of them on the left, near the front of the engine. [Reply]  [No Email]
husker44a 09-20-2012 07:34:45 8.28.70.17 Report to Moderator	Re: 7700 fuel filters in reply to toolz, 09-20-2012 06:50:53   Toolz You must get fuel filters for the 7700 NOT THE 4020. [Reply]  [No Email]
toolz 09-20-2012 11:24:25 166.147.104.29 Report to Moderator	Re: 7700 fuel filters in reply to husker44a, 09-20-2012 07:34:45   Guys, I know I need filters for the 7700. That's why I told you what the engine came out of. I've been on the JD website, and I was just at NAPA, and there's no listing for what I have. I thought possibly someone here had run into this problem. The engine is original to the 7700. I'm on my way to Deere now. [Reply]  [No Email]
Tim S 09-20-2012 13:11:53 99.159.254.50 Report to Moderator	Re: 7700 fuel filters in reply to toolz, 09-20-2012 11:24:25   While your making the big change, go ahead and swap it over to the square glass filter, one is all you need, much easier to change and more available.. [Reply]  [No Email]
toolz 09-20-2012 16:33:14 166.147.104.24 Report to Moderator	Re: 7700 fuel filters in reply to Tim S, 09-20-2012 13:11:53   Tim- Probably should have done that, but didn"t know what the expense would be. Deere dealer told me that most of this style had been changed over years ago. It took them about 30 minutes to figure out what I needed, but they did. The part number is AR45098, and they had them in stock. Also bought the little drain valves for the filters. I know we discussed this before, but I would sure like to change the combine motor over to the oil pan on the 4020 motor. Of course I have both motors here- what would it take? Pump? Pickup? Thanks for the help. [Reply]  [No Email]