|
| |
| John Deere Tractors Discussion Forum |
Topic: John Deere H wont rev up.
[Return to Forum]
| Author |
[Modern View]
|
| chris hill
09-09-2012 18:26:32
75.246.41.223
|
I have a 45 john deere h that idles fine and starts decent but wont rev up. I you try to throttle it up it sounds like you just pulled a kill switch. Sometimes if you press the lever real easy it will take gas. Any help will be appreciated. |
|
|
| Popinjohn
09-10-2012 16:30:30
24.168.43.43
|
|
Re: John Deere H wont rev up. in reply to chris hill, 09-09-2012 18:26:32
|
|
| Sometimes a bad condenser in the magneto or distributor will give the symptoms you mention. |
|
|
| Chris hill
09-10-2012 16:16:57
75.252.66.127
|
|
Re: John Deere H wont rev up. in reply to chris hill, 09-09-2012 18:26:32
|
|
| I have tried turning the screws but it dosent help much. I will try unhooking linkage and see what it does thanks |
|
|
| jbennage
09-10-2012 10:09:35
70.192.130.114
|
|
Re: John Deere H wont rev up. in reply to chris hill, 09-09-2012 18:26:32
|
|
| I have the exact same problem with my 41 H. I talked to a couple of guys who are Marvel Schebler carb gurus. They said the carb needs rebuilt. I just sent it to Dennys Carb Shop in Fletcher, Ohio. Costs about $300.00 and they clean, resurface, replace everything and bake a coat of paint on. 3 days in their shop plus shipping time. Good luck. Here's their url: dennyscarbshop.com |
|
|
| husker44a
09-09-2012 19:32:12
63.172.255.242
|
|
Re: John Deere H wont rev up. in reply to chris hill, 09-09-2012 18:26:32
|
|
| Carb is plugged TIGHT !!!!! Just to make sure it is tho. Start it unhook the throttle at the carb. Run the engine like that. IF no difference then I would say its the carb. IF it runs 100% better I would say you have governor problems. IMO |
|
|
| Bob Harvey
09-09-2012 19:09:23
209.91.107.176
|
|
Re: John Deere H wont rev up. in reply to chris hill, 09-09-2012 18:26:32
|
|
| Maybe open the main jet 1/2 turn and the idle screw the same ? |
|
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|