Author	[Modern View]
Ryaninks 09-05-2012 09:21:28 174.79.111.200 Report to Moderator	Just brought home a 1950 A to tinker with. Bought it from a local salvage yard after an old man DROVE it in there! Anyway, it runs really good, but the clutch driver splines are pretty worn. I'm hoping a new clutch driver will clean up atleast most of it's "slop". Just wondering what is a good source to get one? I don't want to shell out the bucks for junk!!! [Reply]   [No Email]
jd50A 09-05-2012 15:52:19 76.240.47.39 Report to Moderator	Re: Clutch Driver source in reply to Ryaninks, 09-05-2012 09:21:28   I had good luck with Darwin Gingerich 620-386-0071 Bought a clutch driver for a "B" Also, check Joel Martin 610-913-6299 Both sell decent parts. My experiance--- [Reply]  [No Email]
Greenday 09-05-2012 09:43:00 204.185.166.22 Report to Moderator	Re: Clutch Driver source in reply to Ryaninks, 09-05-2012 09:21:28   If its real bad I doubt that just a new driver will fix it. I would check the splines on the crank before oredering a new driver. They also make undersized drivers for some models with worn crank splines. [Reply]  [No Email]
RyaninKS 09-05-2012 10:30:25 174.79.111.200 Report to Moderator	Re: Clutch Driver source in reply to Greenday, 09-05-2012 09:43:00   Quoting Removed, click Modern View to see I checked the splines over and they do have some wear, but nowhere near as bad as the driver itself. So i figure i'm going to have to get a new driver regardless so i'm going to start with that and see how it ends up before i start looking for a crank. And from my little bit of research i seem to be hearing quite afew horror stories about the "undersized" drivers. [Reply]  [No Email]
Mike M 09-05-2012 14:00:45 24.140.0.120 Report to Moderator	Re: Clutch Driver source in reply to RyaninKS, 09-05-2012 10:30:25   From my experience with "undersized" drivers I could not find anything measuring undersized on them. Be nice if they were. [Reply]  [No Email]