Author	[Modern View]
john in nebraska 08-25-2012 09:47:06 209.74.227.247 Report to Moderator	Have this 1936 D thats been sitting close to ten years. Cranks over, but heard a noise and stopped. Got the rocker cover off, full of rust. Looks like the rockers are froze to the shaft. Once I get them freed up, is there a trick to knocking the shaft out of the head? Looks like remove the two water inlets from the ends, then the rocker shaft is open, are there pins or keepers I am not seeing? Am oiling things down with Kroil, going to get the valves moving, then rockers, will only take the shaft out if necessary. Suggestions? [Reply]   [No Email]
john in nebraska 08-26-2012 09:08:55 67.142.167.23 Report to Moderator	Re: JD-D rocker arms in reply to john in nebraska, 08-25-2012 09:47:06   The exploded picture is nice, but doesn't show what keeps the rocker shaft in place?   [Reply]  [No Email]
F-I-T 08-26-2012 11:56:39 184.6.240.123 Report to Moderator	Re: JD-D rocker arms in reply to john in nebraska, 08-26-2012 09:08:55   Quoting Removed, click Modern View to see Could be it's the same as the styled....look at that parts catalog. It shows two "set" screws one each end, driving in from the backside.   [Reply]  [No Email]
farmboy169 08-25-2012 16:54:05 69.42.224.227 Report to Moderator	Re: JD-D rocker arms in reply to john in nebraska, 08-25-2012 09:47:06   Check out JDPARTS and search for "d". It"ll give ya an exploded view of every part on that tractor (very handy).   [Reply]  [No Email]