Author	[Modern View]
JohnDeereGreen 07-28-2012 17:54:44 209.40.211.83 Report to Moderator	Its an 8 speed powershift. When you put it in park and let go of the handle it will pop out of park and go half way between P and neutral. [Reply]   [No Email]
johndeeregreen 07-29-2012 07:11:40 209.40.211.83 Report to Moderator	Re: Powershift won't stay in park in reply to JohnDeereGreen, 07-28-2012 17:54:44   Update: I unattached the cable from the lever thats on the side of the trans. The lever moved easy until it got to where it should be for park, then I had to put pliers on it and pull a little, then all of a sudden it went easy. Now I can move it with my fingers, reattached the cable, went in the cab and tried it. Works perfect, goes into Park easy and stays there. Thanks!   [Reply]  [No Email]
rick deere 07-29-2012 05:28:31 216.163.8.240 Report to Moderator	Re: Powershift won't stay in park in reply to JohnDeereGreen, 07-28-2012 17:54:44   It can be adjusted if that dont do it you have other problems.   [Reply]  [No Email]
johndeeregreen 07-29-2012 05:25:12 209.40.211.83 Report to Moderator	Re: Powershift won't stay in park in reply to Kalli Deschamps, 07-28-2012 17:54:44   Quoting Removed, click Modern View to see Cable is like new at the end, but I'll replace both cable and spring and let you know if that takes care of it   [Reply]  [No Email]
Tx Jim 07-29-2012 04:39:36 67.142.163.25 Report to Moderator	Re: Powershift won't stay in park in reply to n29we, 07-28-2012 17:54:44   Besides the spring the cable can get rusty/dirty causing the cable not to move easily.   [Reply]  [No Email]
M w J 07-28-2012 18:16:59 66.6.1.21 Report to Moderator	Re: Powershift won't stay in park in reply to JohnDeereGreen, 07-28-2012 17:54:44   Its not going into park all the way sometimes the 1/4 in pin in the dash the lever pivots on breaks and the bottom 1/2 of it falls out . or the cable is a little out of its clamp on the bottom also there is a spring that is on the shifter to pull the park cable if you take the top off of the dash you can see it work and maybe see what isn't right.   [Reply]  [No Email]
JohnDeereGreen 07-28-2012 18:27:13 209.40.211.83 Report to Moderator	Re: Powershift won't stay in park in reply to M w J, 07-28-2012 18:16:59   If one person puts it in N and holds it there while a second person goes under the tractor, the part the cable is hooked to isn"t moving ahead all the way, if you pull that piece ahead it stays in park. Wondering if that spring is weak, and its not pushing it as far as it should be, or if there is more to do then that   [Reply]  [No Email]
M w J 07-28-2012 22:06:11 66.6.1.21 Report to Moderator	Re: Powershift won't stay in park in reply to JohnDeereGreen, 07-28-2012 18:27:13   Could be weak spring also those shifters get wore the spring pulls on the arm the park cable hooks to. also the two arms the spring hook to push against each other on the back side to help pull into park they get wore where the touch each other.   [Reply]  [No Email]
JohnDeereGreen 07-28-2012 18:29:28 209.40.211.83 Report to Moderator	Re: Powershift won't stay in park in reply to JohnDeereGreen, 07-28-2012 18:27:13   crap, in my last post, it should say if someone puts it in PARK not N   [Reply]  [No Email]