I ordered the AR96625 assembly to go in the front pump of my 4020. Turned out I needed the shorter one. Using pictures from the forum I cut the stem off, cleaned the cut end up with emery cloth and reinstalled it. It works fine, I can tell when it makes contact with the internal pump part, tractor now finally cranks like is should and then the destroker backs out for full hydraulics.
My question, is there some other difference in the 2 available that doing what I have done will cause a problem or is it going to work fine?
Thank you any advice.
My question, is there some other difference in the 2 available that doing what I have done will cause a problem or is it going to work fine?
Thank you any advice.
