Author [expand]	[Modern View]
Monroe Stephenson 11-19-2009 20:29:38 207.200.116.66 343889 Report to Moderator	going to put loader on a 4010 and was going to put a spool valve to run the loader . Which valve do i need closed center or open center ?? What valve is the best ? and my loader only has power up on the lift cylinders will that work with my spool valve? [Reply]   [Send Email]
Gerald J. 11-20-2009 08:21:16 75.253.112.175 343914 Report to Moderator	Re: 4010 JD open center or closed center valves in reply to Monroe Stephenson, 11-19-2009 20:29:38   Closed center. Tap the elbow by the brake pedals for pressure, and run the valve return to the transmission oil filter cover. The easiest way is to buy one made for a 2640, otherwise drill and tap the existing one. There is a possibility that a high velocity return oil may wreck the filter from a drilled and tapped cover. Gerald J.   [Reply]   [No Email]
LarrySTN 11-19-2009 20:55:39 76.2.69.232 343892 Report to Moderator	Re: 4010 JD open center or closed center valves in reply to Monroe Stephenson, 11-19-2009 20:29:38   As Tim S said 4010's are closed center. Closed center spool valves will work fine with your single acting lift cylinders.   [Reply]   [Send Email]
Tim S 11-19-2009 20:34:42 99.174.172.248 343890 Report to Moderator	Re: 4010 JD open center or closed center valves in reply to Monroe Stephenson, 11-19-2009 20:29:38   The 4010 is closed center,,not sure what you got going on with the cylinders.   [Reply]   [No Email]