Author [expand]	[Modern View]
buickanddeere 11-02-2009 16:10:17 209.240.124.128 341865 Report to Moderator	jake winn said: (quoted from post at 16:11:18 11/02/09) I am looking for the tooth count on the clutch pulley gear and first reduction gear for a 0-530. Part numbers are clutch pulley B3116R 1st reduction gear AB5060R Thanks for any help If you are trying to slow down a 50 a set of 520/530 diff & bull gears will do the trick. if you are trying to speed up a 520/530 then a set of late B or model 50 diff & bull gears are in order. If I recall correctly. The info is in JD parts. [Reply]   [No Email]
jake winn 11-02-2009 18:30:17 207.200.116.66 341893 Report to Moderator	Re: Clutch pulley/1st reduction gear tooth count 50-530 in reply to buickanddeere, 11-02-2009 16:10:17   Actually what im trying to do is slow down a Mid 40's. I have a set of first reduction gears out of a Late B that i can make work with some machining. That will slow it down about 5%. I was hoping for about 10%. I looked in the parts books today at work (Im a parts guy at a Deere dealer) but it doesnt give tooth counts for the first reduction gears on the 50-530.   [Reply]   [Send Email]
jake winn 11-02-2009 18:30:16 207.200.116.66 341892 Report to Moderator	Re: Clutch pulley/1st reduction gear tooth count 50-530 in reply to buickanddeere, 11-02-2009 16:10:17   Actually what im trying to do is slow down a Mid 40's. I have a set of first reduction gears out of a Late B that i can make work with some machining. That will slow it down about 5%. I was hoping for about 10%. I looked in the parts books today at work (Im a parts guy at a Deere dealer) but it doesnt give tooth counts for the first reduction gears on the 50-530.   [Reply]   [Send Email]