|
| |
| Implement Alley Discussion Forum |
Topic: Re: Need a part for a John Deere Van Brunt Drill
[Show Entire Topic] [Return to Forum]
| Author |
[Modern View]
|
| Tx Jim
02-20-2013 04:13:31
67.142.163.27
|
Ken
Here's a list of boots used on the 8000 series drills. The same boots(part #s) also were used on the earlier rubber tired drills such as the model B,FB,FB-A & FB-B which are the ones I'm familiar with. IIRC the number is cast into the boot. The AF boot & hard iron brgs utilized the same boot. Older iron wheel drills utilized a a different boot for mounting hard iron brgs as the hole was "square"
KK168M SEED BOOT 1 ( Z82M) SHORT OPENER, R.H.
KK169M SEED BOOT 1 ( Z83M) SHORT OPENER, L.H.
BB3098M SEED BOOT 1 ( A634M) LONG OPENER, R.H.
BB3099M SEED BOOT 1 ( A635M) LONG OPENER, L.H.
QQ1264M SEED BOOT 1 ( M61848) SEMI-DEEP, LONG OPENER, R.H.
QQ1265M SEED BOOT 1 ( M61849) SEMI-DEEP, LONG OPENER, L.H.
This post was edited by Tx Jim at 04:29:23 02/20/13 2 times.
|
|
|
|
| Ken Sweet
02-20-2013 07:07:52
64.130.183.242
|
|
Re: Need a part for a John Deere Van Brunt Drill in reply to Tx Jim, 02-20-2013 04:13:31
|
|
| The casting # shown in the picture on the left side
of the picture is 6B- A634MLR. Need the whole
assembly and disc also. Standing behind the drill,
this piece is on the left side with single disc
opener discs. Thanks Ken Sweet
|
|
|
| Tx Jim
02-20-2013 09:11:09
67.142.163.23
|
|
Re: Need a part for a John Deere Van Brunt Drill in reply to Ken Sweet, 02-20-2013 07:07:52
|
|
| Ken
Does your drill have LH & RH openers? Some drills had the openers that went only one direction.
|
|
|
| Ken Sweet
02-21-2013 09:00:12
64.130.183.242
|
|
Re: Need a part for a John Deere Van Brunt Drill in reply to Tx Jim, 02-20-2013 09:11:09
|
|
| The one I need is on the left side standing behind
looking forward. Ken Sweet
|
|
|
| Tx Jim
02-21-2013 09:47:39
67.142.163.20
|
|
Re: Need a part for a John Deere Van Brunt Drill in reply to Ken Sweet, 02-21-2013 09:00:12
|
|
|
That should sub to a BB3099M for just the boot
This post was edited by Tx Jim at 09:48:10 02/21/13.
|
|
| [Show Entire Topic]
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
