Author	[Modern View]
Don-Wi 09-12-2012 19:35:15 75.207.5.28 Report to Moderator	Did it break the yoke? Ours twisted the hollow tube and broke the yoke on the PTO end. The wagon side was still ok. I made up a socket to try getting the yoke off the wagon end to replace the bearing behind it, but even with a co-workers snap-on impact on it, and heated, and then heated and cooled, it didn't budge. I torched the bearing off, polished up the shaft good from the back and slid a new bearing on from the back. We used a shaft we kept off another wagon (H&S) that we scrapped out years ago, just put in a new cross on both ends and that part was good to go. Donovan from Wisconsin [Reply]   [No Email]
t j p 09-13-2012 18:37:16 24.229.188.162 Report to Moderator	Re: Gehl 970 chopper box in reply to Don-Wi, 09-12-2012 19:35:15   no ours twisted the 2 parts of the shaft into one about 2 feet from the wagon both yokes are fine. i would like to get it off the wagon, if i can so dont have to weld and grind it while its still on the wagon. i figure it must come apart in the safety clutch. somehow. [Reply]  [No Email]