| Implement Alley Discussion Forum |
Topic: When to cut wheat with a binder?
[Return to Forum]
| Author |
[Modern View]
|
| Richard Hare
09-03-2012 22:08:41
199.243.31.131
|
Evening Gents, Have the old binder ready to go, but have never cut wheat with one before, so when do you reckon it is ready to cut? At present it's a bit soft, in fact some grains are in the soft dough stage, whilst otheres are pretty hard. When do you guys cut?Thanks in advance! R. |
|
|
| Richard Hare
09-06-2012 06:42:51
199.243.31.1
|
|
Re: When to cut wheat with a binder? in reply to Richard Hare, 09-03-2012 22:08:41
|
|
| Thanks for all the help, guys! The hard bit is knowing what it looks like exacxtly, a week or so before it'd be fit for the combine..as in, I'd know that best when it Was fit to combine, then I could say; "Yep,......shoulda' cut it last week!" Still, it's as I thought, and will keep an eye on it. Will let you know how it goes.Thanks again. R. |
|
|
| randy hall
09-05-2012 21:09:59
216.255.38.207
|
|
Re: When to cut wheat with a binder? in reply to Richard Hare, 09-03-2012 22:08:41
|
|
| we cut ours a day before it is ready to combine and load it directly on the wagons to thresh at our fair which is around three weeks later. a little will shell out but not very much. |
|
|
| Dick2
09-04-2012 12:16:08
174.26.218.15
|
|
Re: When to cut wheat with a binder? in reply to Richard Hare, 09-03-2012 22:08:41
|
|
| | Varies by climate, varietu, etc. etc. The old rules were mostly for the way things were done back in the day when the bundles were shocked and left in the field for 30 days before they were threshed. Wath the field for the shelling; the day that you notice any shelling is a day or two past the day that you should have cut it! |
|
|
| flying belgian
09-04-2012 11:21:41
98.132.233.132
|
|
Re: When to cut wheat with a binder? in reply to Richard Hare, 09-03-2012 22:08:41
|
|
| Pa always said to cut oats one week before it is ripe and cut wheat one week after it is ripe. |
|
|
| Brendon-KS
09-04-2012 03:42:35
63.245.190.37
|
|
Re: When to cut wheat with a binder? in reply to Richard Hare, 09-03-2012 22:08:41
|
|
| We always bind a few acres of wheat to be threshed at our annual antique tractor show. We like to bind about a week or two before the grain would be ready for the combine, somewhere in the hard dough stage. If you wait too long there will be more shattering loss. On the other hand, if you bind too early the grain will just shrivel up as it dries. From how you describe your grain it is getting pretty close; by this weekend you can probably be in the field. |
|
|
| Richard Hare
09-04-2012 07:38:30
199.243.31.175
|
|
Re: When to cut wheat with a binder? in reply to Brendon-KS, 09-04-2012 03:42:35
|
|
| | Thanks for the answer, Brendon. It's also only a small patch, maybe 4 acres. It is "Red Fife".. classed as a "heritage" variety up here, and was grown mainly between the 1840's and 1900. I'm not wanting to rush it, as the barley needs swathing when the weather is good, and the oats are coming on fast. Not enough of me to go 'round sometimes! Thanks again! R. |
|
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|