Author	[Modern View]
Badger08 08-30-2012 18:24:28 204.248.117.40 Report to Moderator	I know this sounds like not a big deal, but I don't want to buy the 6.7's and wish I had bought the 7.6's. I am going to make a wagon for tractor rides, so the 6.7's would be lower to the ground a bit for loading and such. But I am thinking I might like the look's of the 7.6's better as they would be a bit taller, and probably have a little bit wider and flatter surface area? So I don't know if anyone has pictures or just some input I would appreciate it. From what I have found, the 7.6's would be an inch taller roughly and are made to be mounted on a 5.5 width vs the 4.5 width of a 6.7. So with a 15 x 5 rim it won't matter much. Thanks! [Reply]   [No Email]
Badger08 09-03-2012 06:32:59 204.248.117.40 Report to Moderator	Re: Go with 6.7-15 or 7.6-15 on JD 953 in reply to Farmallb, 08-30-2012 18:24:28   Quoting Removed, click Modern View to see Do they rub when turning sharp or is that not an issue? [Reply]  [No Email]
Tyler-MO 09-03-2012 05:43:54 50.40.197.113 Report to Moderator	Re: Go with 6.7-15 or 7.6-15 on JD 953 in reply to Badger08, 08-30-2012 18:24:28   I put 9L-15"s on mine at the advice of my tire guy...they are wider than original, but still fit the rims ok. They were about $8 higher than the 7.00x16"s I was looking at. I don"t regret the decision when using it over loose or soft ground with any kind of load. [Reply]  [No Email]
BushogPapa 08-31-2012 20:53:30 173.88.51.117 Report to Moderator	Re: Go with 6.7-15 or 7.6-15 on JD 953 in reply to Badger08, 08-30-2012 18:24:28   You can probably can find suitable sized Radials..used they go cheap.. Ron.. [Reply]  [No Email]