Author	[Modern View]
rwskinner 07-10-2012 10:08:07 12.52.88.13 Report to Moderator	I've taken a few pictures while I've been rebuilding this old gal. Belts, Chains, Sprockets, builing pickup bars, shafts from scratch and rebuilding the spiders. Nothing fancy but if your interested here is the link... JD 530 Rebuild [Reply]   [No Email]
Tx Jim 07-15-2012 06:12:13 67.142.163.27 Report to Moderator	Re: Rebuilding an old JD 530 in reply to TC NWTN, 07-10-2012 10:08:07   Quoting Removed, click Modern View to see I agree with you. IMHO rwskinner did a lot of excellent machine work for naught except I thought the extra twine arm was very nice work. All that work won't make that nice looking ole 530 make a better bale of hay. If I was rwskinner I'd build the rest of the push bar seeing how his 530 has the RH top push bar bracket which wasn't a factory option. [Reply]  [No Email]
cannonball 07-15-2012 05:46:00 75.88.7.167 Report to Moderator	Re: Rebuilding an old JD 530 in reply to rwskinner, 07-10-2012 10:08:07   Them spiders were no where near worn out...you better hope that bushing stays, but I'm betting it won't.... [Reply]  [No Email]
Old Bob 07-10-2012 17:57:44 69.29.103.76 Report to Moderator	Re: Rebuilding an old JD 530 in reply to rwskinner, 07-10-2012 10:08:07   These were good balers. I baled a lot of hay with one of these. I baled so much that the sides had holes wore in them from the bales turning as they were being formed. [Reply]  [No Email]
Leroy 07-10-2012 17:21:13 69.88.205.38 Report to Moderator	Re: Rebuilding an old JD 530 in reply to rwskinner, 07-10-2012 10:08:07   Reading topic line automaticaly think of JD 530 tractor built 1959, not a baler [Reply]  [No Email]