Author [expand]	[Modern View]
Scott PA 10-14-2009 17:28:00 64.12.117.79 170072 Report to Moderator	You have a Ferguson-Lindeman model LP-16 plow, there is a special top link you must be missing with an alignment rod, arm with a roller for the pin release and a fork that goes over one pulley at a time when you raise your 3 point hitch to turn the plow, if you noticed the hole where the top link goes on the top of the plow is one size smaller that the normal top link pin hole. [Reply]   [No Email]
Tony in Mass. 10-14-2009 18:33:00 65.55.67.224 170074 Report to Moderator	Re: 2 way flip over plow in reply to Scott PA, 10-14-2009 17:28:00   Scott, you obviuosly have one of these things- so the top link has an arm that must fit in the yoke with the coil springs on both sides? sounds like something I can weld up- but it sounds like adjusting the length of the top link would be tough- or was it 22" on the centers period? As for the pulleys, that will be a tough thing to fabricate without ever seeing one... sounds like the top link is 50% of the plow?... that stinks. I guess I will be getting on and off. A wealth of information in one paragragh! Thank you Scott! good night, Tony   [Reply]   [Send Email]
Scott PA 10-15-2009 17:23:41 64.12.117.79 170101 Report to Moderator	Re: 2 way flip over plow in reply to Tony in Mass., 10-14-2009 18:33:00   Do you have access to a fax machine? I could send you a picture of the top link so you can ask the person you got it from if they still have it, you can click on send email to reply.   [Reply]   [Send Email]
Tony in Mass. 10-15-2009 17:40:28 65.55.67.208 170104 Report to Moderator	Re: 2 way flip over plow in reply to Scott PA, 10-15-2009 17:23:41   Oh that ain't gonna happen Scott, that part is long gone. My fax is out of ink anyway. But, I have an idea this top link is 'L' shaped, but the arm is welded on at a certain angle. The part that fits on the front rollers has me stumped until I see one. There are alot of Fergie 2 way plows around here, but all butterfly except this one. I thought it was only missing a piece of angle with a rope attached or something. wrong again. Pics of one will pop up one of these days, thanks again Scott, tony   [Reply]   [Send Email]
Scott PA 10-16-2009 17:32:00 64.12.117.79 170139 Report to Moderator	Re: 2 way flip over plow in reply to Tony in Mass., 10-15-2009 17:40:28   I can mail you a picture then, click on send email to give me your address, thanks, Scott.   [Reply]   [Send Email]