Author	[Modern View]
Case Nutty 1660 12-25-2012 07:01:27 75.127.24.27 Report to Moderator	Delta I believe has the right number for the feeder chain, as to the floor tin I think you will have a very hard time finding any NOS or reproduction stock, I will assume you are working on a grain hdr as you asked for floor tin, keep this in mind 1000/1010 hdrs will all work and there are a lot of these out there, only differance is the 1000 hdrs have a different carrier yoke size so these will have to be changed out if you intend to use a 1000 hdr, also the 1160 uses a #80 drive chain unlike the others that use #60 but you can change the drive sproket out no problem I do have NOS floor tin that I could get you measurements from but sorry my sets are not for sale hope this helps we all would like some pics of your purchase/progress if you don't mind, I can check out the chain # also but I know that is correct for my 1660 and I do think the 1000/1160 had the same side chains cnt [Reply]   [No Email]
casecollectorsc 12-25-2012 07:37:09 64.33.231.171 Report to Moderator	Re: case 1060/1160 parts in reply to Case Nutty 1660, 12-25-2012 07:01:27   I replace the floor tin with 20ga. stainless. Only have to do it once that way. 20ga. stainless is as strong as the 18ga original but easier to work with. [Reply]  [No Email]
Case Nutty 1660 12-25-2012 09:42:09 75.127.24.27 Report to Moderator	Re: case 1060/1160 parts in reply to casecollectorsc, 12-25-2012 07:37:09   thats a very good point!! thanks cnt [Reply]  [No Email]