|
| |
| Garden Tractors Discussion Forum |
Topic: Onan Carb.
[Return to Forum]
| Author |
[Modern View]
|
| Icuby
01-26-2013 12:43:15
174.225.135.185
|
Got a Onan 'performer 24' in skid loader w/Nikki carb.Was loading up on gas bad. Installed many dollars{$100] in parts in carb. and now it wants to surge at all speeds except wide open. It does have good working power.There are no adjustments on this carb. Any ideas? Thanks
|
|
|
| JT Britt
01-27-2013 18:45:01
66.87.7.179
|
|
Re: Onan Carb. in reply to Icuby, 01-26-2013 12:43:15
|
|
|  Make sure this welch plug is not missing.If my memory serves me correct it would surge at all speeds if it were missing.
|
|
|
| SuperABen
01-26-2013 18:12:41
184.63.130.244
|
|
Re: Onan Carb. in reply to Icuby, 01-26-2013 12:43:15
|
|
| | To check if you have an air leak, I usually get the engine running and take a little propane canister with the valve open around the carburetor. If the engine speeds up, you have an air leak somewhere. Ben W. in VA
OldPathsEquipment.com
|
|
|
| geoff gwisdala
01-26-2013 17:40:36
75.133.94.2
|
|
Re: Onan Carb. in reply to Icuby, 01-26-2013 12:43:15
|
|
| Onan intake manifolds are 2 piece aluminum held together with rivets and RTV. My 318 John Deere was surging badly, I pulled the intake, JB welded it together and cured the problem. Onan carbs and intakes are really fussy about the amount of air so if any air leaks they will run poorly
|
|
|
| S/C Bob
01-26-2013 12:54:03
199.190.11.26
|
|
Re: Onan Carb. in reply to Icuby, 01-26-2013 12:43:15
|
|
| My 16hp did the same thing but the biggest thing I found was one of the adjusting screw hole was wore and it was getting too much air. I bought another carb on ebay and took the best of the two and built one. Runs smooth now. You may be getting too much air somewhere. Good luck
|
|
|
| boomers_influence
01-26-2013 17:01:35
96.3.33.148
|
|
Re: Onan Carb. in reply to S/C Bob, 01-26-2013 12:54:03
|
|
| icuby
you may call on this if you wish.
651 437 2826
thank you. boomer ( the used onan engine parts guy )
|
|
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
