Author	[Modern View]
husky 06-05-2012 18:09:53 24.3.24.198 Report to Moderator	HI I BLEW THE ENGINE ON MY TRACTOR NOW I NEED AN ENGINE FOR IT , CUBCADET WANTS 2300.00 FOR A NEW ONE !!!!!!!!!!!!!!!!! I CANNOT READ THE NUMBERS OFF THE ENGINE THEY ARE GONE !!!!!!!!!!! ANY SUGGESTIONS OF WHERE TO FIND A NEW ENGINE ??????????? GOOD DEAL ECT ????????????????? THANK YOU [Reply]   [No Email]
dhermesc 06-07-2012 06:05:44 24.248.193.103 Report to Moderator	Re: cub cadet 2084 in reply to husky, 06-05-2012 18:09:53   Small engine ware house has what you need: http://www.smallenginewarehouse.com/RepowerItems.asp?Brand=Cub%20Cadet&Model=2084 Kohler 18-22hp CH18-22 shortblock, 1-1/8"x2 3/4" shaft, fits Cub Cadet 1964, 2084 0 $1,090.00 [Reply]  [No Email]
dhermesc 06-07-2012 06:06:51 24.248.193.103 Report to Moderator	Re: cub cadet 2084 in reply to dhermesc, 06-07-2012 06:05:44   Sorry, my mistake they don't have any of those on hand right now. [Reply]  [No Email]
R Bedell 06-07-2012 04:01:46 174.124.252.225 Report to Moderator	Re: cub cadet 2084 in reply to husky, 06-05-2012 18:09:53   husky: The 2084 rolled out of the factory with a Kohler CH20S - Spec #66510 [Reply]  [No Email]
rexbeavers 06-06-2012 16:06:01 72.28.7.127 Report to Moderator	Re: cub cadet 2084 in reply to husky, 06-05-2012 18:09:53   its a kohler 20 hp magum motor if the block dident get a hole in it it mite be cheaper to rebuild it a small engine shop can give you a price to rebuild it [Reply]  [No Email]
t.r.k. 06-05-2012 19:13:16 71.31.64.233 Report to Moderator	Re: cub cadet 2084 in reply to husky, 06-05-2012 18:09:53   You don't say what kind of engine it is. Or what horsepower it developed. If you are shopping for a new engine of any brand to fit that mower you will also need to know: 1. The diameter and length of the crankshaft. And sometimes the width of the keyway. 2. Amp output of the charging system. (very important if yours has an electric clutch) 3. What other electrical devices do you have on the old engine, such as A. fuel solenoid on the carburetor B. Oil sending unit? C. Other? 4. Your old engine is probably carbureted, but you need to know for sure, because fuel supply requirements are different on engines with fuel injection. Oh-and you need to know if the replacement engine needs a fuel pump on it. [Reply]  [No Email]
El Toro 06-05-2012 18:27:00 108.3.225.57 Report to Moderator	Re: cub cadet 2084 in reply to husky, 06-05-2012 18:09:53   Try smallenginewarehouse.com Hal [Reply]  [No Email]
rexbeavers 06-06-2012 15:59:55 72.28.7.127 Report to Moderator	Re: cub cadet 2084 in reply to El Toro, 06-05-2012 18:27:00   it should be a kohler 20 hp magum motor go to small engine ware house an loook for 20 kohler magum motor for a cub what let go did the cam break it mite be cheaper to rebuid it [Reply]  [No Email]
rexbeavers 06-06-2012 16:03:11 72.28.7.127 Report to Moderator	Re: cub cadet 2084 in reply to rexbeavers, 06-06-2012 15:59:55   its a 20 hp kohler magum motor did the cam bust or did put a hole in block it mite be cheaper to rebuild it go to small engine ware house a look for kohler 20 hp magum motor for a cub [Reply]  [No Email]