Author	[Modern View]
Mike Farmer 05-23-2010 05:17:16 86.29.32.60 Report to Moderator	Hi. My book does not give any difference between petrol and diesel so this is subject to that. Main bearing jornal=2.7485--2.749 Diametral clearances=0.0025--0.0045 Big end bearing jornal=2.2485--2.249 Diametral clearance=0.002--0.0035 Undersizes available--.010"--.020"--.030" May I suggest before you get toooo far into this find out what bearings are ACTUALLY available. Good luck. MTF [Reply]   [No Email]
Tom Walch 05-23-2010 06:05:17 70.49.161.161 Report to Moderator	Re: Crank journal specs for a Dexta Petrol in reply to Mike Farmer, 05-23-2010 05:17:16   Thank you for your information. I did find the engine specs on the bare-co catalogue site. They have a section under the engine parts in the US site for Tech specs. If anyone reading this is in Ontario Canada I am trying to get a complete engine for this tractor for parts a FE 35 Massey also has the same internal parts although the block is different. This is the Standard engine 87mm gasoline powered. Note diesels for this tractor are completely different. [Reply]  [No Email]
Mike Farmer 05-24-2010 13:36:00 86.29.32.60 Report to Moderator	Re: Crank journal specs for a Dexta Petrol in reply to Tom Walch, 05-23-2010 06:05:17   Just as amatter of interest I had forgotten that the Dexta had the Standard Engine fitted same as Little grey fergie(almost) I've actuall got a 1954? Standard vanguard Saloon Car with the same engine MTF [Reply]  [No Email]