Author [expand]	[Modern View]
780 prairieboy 10-12-2009 18:26:35 96.53.200.114 17767 Report to Moderator	Have a power major with pneumatic governor that is giving trouble, upon taking governor housing off I discovered that the rubber diaphram was spilt and the small valve that goes into the diaphram retaining screw on one end(the one with rounded head and small hole in it)and into the adjustable damping valve assembly. THIS VALVE IS MISSING ,do have the threaded housing with locknut , tried to obtain one thru fuel injection repair shops and fordson dealers ,all advise this is an obsolete part. I did get a replacement diaphram but unable to locate a valve. does anyone have this part or able to provide a detailed drawing that I could get a machine shop to make one? [Reply]   [Send Email]
780 prairieboy 10-31-2009 19:15:10 96.53.211.183 17856 Report to Moderator	message for mike farmer in reply to 780 prairieboy, 10-12-2009 18:26:35   have been trying to send e-mail to you thru forum it looks like you are not getting them please repy back to me .I think you have my e-mail   [Reply]   [Send Email]
Mike Farmer 11-01-2009 11:54:20 86.27.53.95 17858 Report to Moderator	Re: message for mike farmer in reply to 780 prairieboy, 10-31-2009 19:15:10   My Email address is mnv.greenfarm@virgin.net.uk If it doesn;t work try it without the .uk on the end.I quite happy for you to contact me on that. MTF   [Reply]   [Send Email]
Mike Farmer 10-17-2009 03:50:10 81.109.180.55 17798 Report to Moderator	Re: power major pneumatic governor in reply to 780 prairieboy, 10-12-2009 18:26:35   Hi I got your message. Where are you then I can let you know the approx postage I dont even know what country you are in. I dont want anything for this item but I would appreciate it if you could pay the postage. MTF   [Reply]   [Send Email]
Mike Farmer 10-14-2009 07:25:40 86.27.74.232 17783 Report to Moderator	Re: power major pneumatic governor in reply to 780 prairieboy, 10-12-2009 18:26:35   Hi Prairieboy. You are in luck. One of my old pumps still has the part on it. I will send you the complete end with what feels like a good diaphram etc all still in it. Just give me your postal address and i'll send it off tomorrow. Maybe any bits of it that you dont need you will pass on. MTF   [Reply]   [Send Email]
Mike Farmer 10-20-2009 06:55:22 81.107.211.208 17806 Report to Moderator	Re: power major pneumatic governor in reply to Mike Farmer, 10-14-2009 07:25:40   Hi. The postage for this complete part is C$18.00 let me know and I'll send it straight away. MTF   [Reply]   [Send Email]
Mike Farmer 10-14-2009 02:57:47 86.27.74.232 17781 Report to Moderator	Re: power major pneumatic governor in reply to 780 prairieboy, 10-12-2009 18:26:35   OK I look later today and come back to you. I dont remember seeing these bits for ages but I'm sure they are still there somewhere. MTF   [Reply]   [Send Email]
Mike Farmer 10-13-2009 11:21:12 82.13.26.174 17773 Report to Moderator	Re: power major pneumatic governor in reply to 780 prairieboy, 10-12-2009 18:26:35   Hi I am trying to post an exploded diagram of the pnuematic governor. I think I've still got a couple of old pumps etc SOMEWHERE in the barn. If you let me know whwt part you need I'll try to sort it out for you. I can't make any promises but I'll give it a go. Looks like I've got the size wrong Sorry MTF   [Reply]   [Send Email]
780 prairieboy 10-13-2009 11:40:45 198.166.23.200 17774 Report to Moderator	Re: power major pneumatic governor in reply to Mike Farmer, 10-13-2009 11:21:12   thanks for the reply. I require all three pieces shown in fig 71 , the bolt with round head, the taper valve and the threaded piece with bushing. does not matter if the taper valve is long or short as long as the part with bushing matches.   [Reply]   [Send Email]